The information in this article applies to:
SYMPTOMSYour computer stops responding (hangs) when you try to use an audio compact disk (CD) in a NEC Intersect CDR-37 CD-ROM drive. Ejecting the CD causes the error message "Drive Not Ready" to occur. You can use the system normally once you close the error message box. CAUSEThe NEC Intersect CDR-37 CD-ROM drive is not supported for CD Audio when you are using the Windows 95 protected-mode drivers because it does not respond correctly to CD Audio commands. RESOLUTIONSThis drive should function correctly with audio CDs when you are using real- mode CD-ROM and MSCDEX.EXE drivers. To use real-mode drivers instead of the Windows 95 protected-mode drivers, load the CD-ROM driver in the CONFIG.SYS file, and load MSCDEX.EXE in the AUTOEXEC.BAT file following the manufacturer's instructions. Note that if these drivers were already installed when you installed Windows 95, they may still be in the CONFIG.SYS and AUTOEXEC.BAT files, but be remarked out.If using the real-mode drivers does not resolve the problem, you may need to disable the CD-ROM drive in Device Manager. To do so, follow these steps:
STATUSMicrosoft is researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.
Keywords : diskmem win95 wpp95 |
Last Reviewed: June 22, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |