Problems Using Diamond Viper VLB Video Adapter
ID: Q129212
|
The information in this article applies to:
SYMPTOMS
After you install Windows 95 on a computer with a Diamond Viper VLB video
card and the Diamond Windows 3.1 video drivers, you may experience one or
more of the following problems:
- 16-color VGA is the only resolution listed.
- You can use only one setting. For example, you can use only the
640 x 480 x 256 setting.
- When you restart Windows 95 you receive an error messages stating
that the display adapter is not configured properly.
CAUSE
Windows 95 does not detect the Diamond Viper VLB video card (with the
Weitek P9000 chip set), so it installs the standard VGA adapter driver.
RESOLUTION
There are Diamond-supplied Beta 32-bit video drivers on the Windows 95
CD-ROM in the Drivers\Display\Diamond folder. Please note that these are
Beta drivers, and may not function correctly with all hardware. If you
have the floppy disk version of Windows 95, you can obtain these drivers
from Diamond directly. For information about obtaining these drivers from
Diamond, please see the Viper.txt file.
To resolve this problem, follow these steps:
- Click the Start button, point to Settings, then click Control Panel.
- Double-click the System icon.
- Click the Device Manager tab.
- Double-click Display Adapters, click Standard Display Adapter (VGA),
then click the Remove button.
NOTE: Do not restart your computer when you are prompted to do so.
- Double-click the Add New Hardware icon in Control Panel.
- Click Next, click the No button to select it, and then click Next.
- Click Display Adapters in the Hardware Types list, and then click Next.
- Click Have Disk, select the Drivers\Display\Diamond folder on the
Windows 95 CD-ROM, and then install the appropriate Diamond Viper
driver for your video adapter.
- Shut down and restart your computer.
NOTE: You still need a Viper.ini file (created by Vprmode.exe) stored
in the C:\Viper folder or another location referenced by the "Set
ViperPath=" statement in the Autoexec.bat file. After installing these
beta drivers, you cannot use the Windows 3.1 Diamond Install tool in
Control Panel. It will cause a general protection fault.
MORE INFORMATION
After you remove the standard VGA adapter from Device Manager, you must
use the Add New Hardware tool in Control Panel to add a new video adapter
if you replace the Diamond Viper card.
The third-party products discussed in this article are manufactured by a
vendor independent of Microsoft; we make no warranty, implied or otherwise,
regarding these products' performance or reliability.
Additional query words:
vesa local bus
Keywords : win95
Version : 95
Platform : WINDOWS
Issue type :