Compaq Screen Does Not Wake Up After EnergyStar Shutdown

ID: Q132886

The information in this article applies to:

Microsoft Windows 95

SYMPTOMS

When you try to "wake up" your computer after Advanced Power Management (APM) has shut down the screen, the screen may remain in sleep mode. To re-activate the screen you must turn the computer off and back on.

CAUSE

This problem can occur with Compaq computers using the Cirrus Logic 54xxx video chip set because of a conflict between APM and the computer's BIOS.

RESOLUTION

To resolve this problem, use one of the following methods:

Do not enable APM in the computer's CMOS settings.

Do not inform Windows 95 that the monitor is EnergyStar compliant.

Disable APM in Device Manager in Windows 95.

Contact Compaq about obtaining a BIOS upgrade.

MORE INFORMATION

The following computers are known to exhibit this problem:

Compaq Presario 520

Compaq Presario 522

Compaq Presario 524

Compaq Presario 526

Compaq Presario 528

Compaq Prolinea 466

NOTE: These computers do not have a flash (programmable) BIOS, so the BIOS chip(s) must be replaced. To perform this task, please contact Compaq Technical Support.

Additional query words: energy star

Keywords : win95 wpp95
Version : 95
Platform : WINDOWS
Issue type :