List of Documentation Errors in Windows 95 Resource Kit
ID: Q135849
|
The information in this article applies to:
SUMMARY
This article lists known documentation errors in the Microsoft Windows 95
Resource Kit and the Microsoft Windows 95 Resource Kit Help file located
in the Admin\Reskit\Helpfile folder on the Windows 95 CD-ROM.
The following known documentation errors are described in this article:
- Page 111: Technical Issues for Microsoft Protected-Mode Clients
Online Help: Planning for Shared Installations
- Page 140: System Startup and Networking for Shared Installations
Online Help: System Startup and Networking for Shared Installations
- Page 145: Custom Installations of Windows 95: The Issues
Online Help: Customizing Windows 95 with WRKGRP.INI Files
- Page 197: Initializing Static VxDs at Startup
Online Help: Initializing Static VxDs at Startup
- Page 202: Config.sys Settings Incorporated in Windows 95 Ios.sys
Online Help: Io.sys: The Real-Mode Operating System
- Page 204: MSDOS.SYS Values
Online Help: MSDOS.SYS: Special Startup Values
- Page 214: Changes to SYSTEM.INI
Online Help: Changes to SYSTEM.INI
- Page 221: Installing Windows 95 for Dual Booting with Windows 3.x
Online Help: Installing Windows 95 for Dual Booting with Windows 3.x
- Page 226: Installing Windows 95 over DR DOS
Online Help: Installing Windows 95 over DR DOS
- Page 292: Supporting Pass-Through Security for Peer Resource Sharing
Online Help: Supporting Pass-Through Security for Peer Resource Sharing
- Page 303: Additional Settings for Client for NetWare Networks
Online Help: Additional Settings for Client for NetWare Networks
- Page 340: Artisoft LANtastic, Configuration File Entries.
- Page 354: Configuring Microsoft DLC with ODI Drivers
- Page 375: Using Login Scripts with Microsoft Networking
- Page 392: To View Volumes on a Server
Online Help: Using Commands to Connect to NetWare Servers
- Page 431: IPX/SPX Technical Notes on NetWare Networks
Online Help: IPX/SPX Technical Notes on NetWare Networks
- Page 457: Sources for Windows 95 System Management Tools
Online Help: Sources for Windows 95 System Management Tools
- Page 465: To Set Up User-Level Security on a Computer on a Microsoft
Network
Online Help: To Set Up User-Level Security on a Computer on a
Microsoft Network
- Page 488: Maintaining Roving User Profiles on Other Networks
Online Help: Maintaining Roving User Profiles on Other Networks
- Page 570: Using File-System Troubleshooting Options
Online Help: Using File-System Troubleshooting Options
- Page 627: Mouse and Pointing Device Driver Overview
Online Help: Mouse and Pointing Device Driver Overview
- Page 687: To Preserve Long Filenames with Disk Utilities that Do Not
Recognize Them
Online Help: To Preserve Long Filenames with Disk Utilities that Do Not
Recognize Them
- Page 688: Technical Notes on Long Filenames
Online Help: Technical Notes on Long Filenames
- Page 689: Turning Off the Extended File System Features
Online Help: Technical Notes on Long Filenames
- Page 719: Creating an Apps.ini File
Online Help: Creating an Apps.ini File
- Page 755: Limit on Number of Installed TrueType Fonts
- Page 766: Using DEC PrintServer Software for Windows 95
Online Help: Using DEC PrintServer Software for Windows 95
- Page 777: Loading Fonts in Windows 95
Online Help: Loading Fonts in Windows 95
- Page 782: Graphic images don't print correctly or output is garbled
- Page 783: Printing is slower than normal
- Page 784: To troubleshoot a computer that stalls while printing to a
local printer and network printer
- Page 847: To Choose Which Profile to Use at Startup
- Page 896: To Install SLIP
Online Help: Configuring a Windows 95 Dial-Up Client
- Page 899: Configuring a Windows 95 Dial-Up Server
- Page 1019: Getting Started with Registry Editor
Online Help: Getting Started with Registry Editor
- Page 1066: Safe Mode Without Compression
- Page 1104: Native Windows 95 Commands
Online Help: Introduction of Native Windows 95 Commands
- Page 1111: Incorrect Directory and Command List
- Page 1120: Xcopy Command-Line Switches
Online Help: Xcopy Command-Line Switches
- Pages 1159-1160: General INF File Format--[Version] Section
- Pages 1161-1162: [Install] Section
Online Help: Windows 95 INF Files: [Install] Section
- Page 1182: [InstallLocationsMRU]
Online Help: [InstallLocationsMRU]
- Page 1193: MSBATCH.INF Parameters: netcard_ID
Online Help: netcard_ID
- Page 1194: DNS Servers
Online Help: DNS Servers, MSBATCH.INF Parameters
- Page 1200: [Printers]
Online Help: [Printers]
- Page 1206: MSBATCH.INF Sample File
Online Help: MSBATCH.INF Sample File
- Page 1209: Windows 95 Network Adapter INF Summary: Intel
Online Help: Windows 95 Network Adapter INF Summary: Intel
- Page 1243: Customizable Display for Mouse Pointer
Online Help: Customizable Display for Mouse Pointer
- Page 1257: Getting Answers to Your Technical Questions
Online Help: Getting Answers to Your Technical Questions
MORE INFORMATIONPage 111: Technical Issues for Microsoft Protected-Mode Clients
Online Help: Planning for Shared Installations
The fourth bulleted item of this topic states: "For protected-mode
network clients, you cannot use a PCI network adapter or ISA adapters
on a PCI computer for system startup over the network. This is
because PCI adapters do not start until the second booting of Windows
95. For shared installations, the adapter must start on the first
boot."
This item should state: "For protected-mode network clients, you
cannot use a PCI, EISA, or ISA Plug and Play network adapter for system
startup over the network. This is because these adapters do not start until
the second booting of Windows 95. For shared installations, the adapter
must start on the first boot."
Page 140: System Startup and Networking for Shared Installations
Online Help: System Startup and Networking for Shared Installations
Page 140 gives the following command:
net logon generic_name password /y
This command only works for the Client for Microsoft Networks when
connecting to SBS shares on an SMB server.
Page 145: Custom Installations of Windows 95: The Issues
Online Help: Customizing Windows 95 with WRKGRP.INI Files
This topic states that the Wrkgrp.ini file should be located in the shared
folder that contains the Windows 95 source files. This information is
incorrect. The Wrkgrp.ini file should be located in the System folder in
the shared folder that contains the Windows 95 source files.
Page 197: Initializing Static VxDs at Startup
Online Help: Initializing Static VxDs at Startup
The last sentence of the first paragraph reads: "Notice, however, that if a
VxD file is in the Windows System\Vmm32 directory, Windows 95 loads it in
addition to the combined VxDs in Mrci2.vxd."
This sentence should read: "Notice, however, that if a VxD file is in the
Windows System\Vmm32 directory, Windows 95 loads it in addition to the
combined VxDs in Vmm32.vxd."
Page 202: Config.sys Settings Incorporated in Windows 95 Io.sys
Online Help: Io.sys: The Real-Mode Operating System
The "Config.sys Settings Incorporated in Windows 95 Io.sys" topic states
that the default value for the "files=" setting is 60. This default is
actually 30.
Page 204: MSDOS.SYS Values
Online Help: MSDOS.SYS: Special Startup Values
In the [Options] section, the entry that reads
BootFailSafe=
should read:
BootSafe=
Note: BootSafe=1 will boot your computer into safe mode.
Page 214: Changes to SYSTEM.INI
Online Help: Changes to SYSTEM.INI
In the "Entries Added to the [Boot] Section of SYSTEM.INI" section, the
entry that reads
sound.drv=sound.drv
should read:
sound.drv=mmsound.drv
Page 221: Installing Windows 95 for Dual Booting with Windows 3.x
Online Help: Installing Windows 95 for Dual Booting with Windows 3.x
The note at the bottom of the page states:
NOTE: If you are using disk compression software, you need to copy IO.DOS,
MSDOS.DOS, COMMAND.DOS, CONFIG.DOS, and AUTOEXEC.BAT to your host drive
also.
The reference to AUTOEXEC.BAT is incorrect. The note should read:
NOTE: If you are using disk compression software, you need to copy IO.DOS,
MSDOS.DOS, COMMAND.DOS, CONFIG.DOS, and AUTOEXEC.DOS to your host drive
also.
Page 226: Installing Windows 95 over DR DOS
Online Help: Installing Windows 95 over DR DOS
The first bulleted item in this topic states: "Some DR DOS utilities can
cause compatibility problems with the Windows 95 real-mode kernel; Windows
95 Setup uses rem to comment out any command lines in the configuration
files that start such utilities."
This item should state: "Some DR DOS utilities can cause compatibility
problems with the Windows 95 real-mode kernel; Windows 95 Setup removes or
uses rem to comment out any command lines in the configuration files that
start such utilities."
Page 292: Supporting Pass-Through Security for Peer Resource Sharing
Online Help: Supporting Pass-Through Security for Peer Resource Sharing
This section states:
If computers running Windows 95 will be providing File and Printer
Sharing Services for NetWare Networks, then the NetWare server
providing access validation must be configured with a special
WINDOWS_PASSTHRU account. This special account is used to support
pass-through validation for user-level security.
This statement is incorrect. A WINDOWS_PASSTHRU account is not needed as
long as the person logging on to the server has an account.
Page 303: Additional Settings for Client for NetWare Networks
Online Help: Additional Settings for Client for NetWare Networks
- The "Setting maximum IPX packet size for the LIP protocol" section
states, in part:
...add a registry value named MaxLIP and specify a binary or
DWORD value that is the greatest value allowed on any one network
segment.
Note that the value should actually be a binary value entered in
hexadecimal in reverse order. For example, if you want to specify a
maximum packet size of 1024, enter 00 04 in the binary registry key.
(1024 is 0400 in hexadecimal.)
- The "Turning off support for packet-burst protocol" section states:
If you want to turn off support for the packet-burst protocol (which
is enabled by default for File and Printer Sharing for NetWare
Networks), set SupportBurst=0 in the following Registry key:
Hkey_Local_Machine\System\CurrentControlSet\Services\VxD\Nwserver
The registry key is actually:
Hkey_Local_Machine\System\CurrentControlSet\Services\VxD\Nwredir
Page 340: Artisoft LANtastic, Configuration File Entries
The Configuration File Entries show the System.ini file requiring the
following entry:
[LANTASTIC]
network_irq=15
This network_irq=15 entry is not required and Setup will remove it.
Page 354: Configuring Microsoft DLC with ODI Drivers
The third entry in the Autoexec.bat is listed as Odinhlp.exe.
The correct component name is Odihlp.exe.
Page 375: Using Login Scripts with Microsoft Networking
Page 375 includes a table named Special Login Script Parameters. Windows
NT login variables, including those in this table, do not work in Windows
95. The table contains the following parameters:
%OS%
%PROCESSOR%
%USERDOMAIN%
%USERNAME%
NOTE: The Microsoft Windows 95 Resource Kit Help file does not include this
table.
Page 392: To View Volumes on a Server
Online Help: Using Commands to Connect to NetWare Servers
The last paragraph of the "To view volumes on a server" bulleted item
states: "Use the /network parameter to specify the volumes on the
particular network you want to view" and gives the following example:
net view \\nwserver_name /network:nw
The /network parameter is not a valid option for the NET VIEW command.
Page 431: IPX/SPX Technical Notes on NetWare Networks
Online Help: IPX/SPX Technical Notes on NetWare Networks
The second bulleted item of this section states:
SPX-II is a protocol definition for windowing and transmitting large
packets over SPX. You can run any SPX-II application under Windows 95
using the IPX/SPX-compatible protocol. The related Novell-supplied file
TLI.DLL must be available on the computer to support SPX-II.
This item should read:
SPX-II is a protocol definition for windowing and transmitting large
packets over SPX. The IPX/SPX-compatible protocol included with Windows 95
(Nwlink.vxd) does not support SPX-II. There are third-party dynamic link
libraries (DLLs) available that provide SPX-II support when you are using
Nwlink.vxd. However, if you are using a third-party DLL intended to
provide SPX-II support and a program communicates directly with
Nwlink.vxd, SPX-II support is not available to that program.
Page 457: Sources for Windows 95 System Management Tools
Online Help: Sources for Windows 95 System Management Tools
This topic states:
When you install Windows 95 from the installation floppy disks, System
Policy Editor is installed automatically with the operational system
files. This tool can be used to modify INI files, CONFIG.SYS, and
AUTOEXEC.BAT.
This statement is incorrect. The tool that is installed automatically is
System Configuration Editor, not System Policy Editor. You can use System
Configuration Editor to modify INI files and the Config.sys and
Autoexec.bat files.
System Policy Editor is included with the CD-ROM version of Windows 95 and
is not installed automatically.
Page 465: To Set Up User-Level Security on a Computer on a Microsoft
Network
Online Help: To Set Up User-Level Security on a Computer on a
Microsoft Network
Step 2 states: "Type the name of the Windows NT domain or Windows NT
workstation where the user accounts reside, and then click OK."
This step is incorrect. You can type the name of a Windows NT domain or
a Windows NT server, but not a Windows NT workstation.
Page 488: Maintaining Roving User Profiles on Other Networks
Online Help: Maintaining Roving User Profiles on Other Networks
The [Profiles] section states the following:
[Profiles]
Mary=\\bigserver\homedirs\mary
John=\\bigserver\homedirs\john
Pat=\\bigserver\homedirs\pat
This section should read:
[Profiles]
Mary=\\bigserver\homedirs\mary\user.dat
John=\\bigserver\homedirs\john\user.dat
Pat=\\bigserver\homedirs\pat\user.dat
The Resource Kit does not include these instructions:
Page 570: Using File-System Troubleshooting Options
Online Help: Using File-System Troubleshooting Options
The first sentence of the "Disable All 32-bit Protected-Mode Disk Drivers"
section states: "This option ensures that no 32-bit disk drivers are loaded
in the system, except the floppy driver."
This section should read: "This option disables the 32-bit protected-mode
floppy disk driver (Hsflop.pdr), and floppy disk I/O is performed as in
previous versions of Windows."
Page 627: Mouse and Pointing Device Driver Overview
Online Help: Mouse and Pointing Device Driver Overview
This topic states:
In addition to better mouse services, Windows 95 allows the use of
serial ports COM1 through COM4 for connecting a mouse or other
pointing device.
This topic should state:
Windows 95 allows the use of serial ports COM1 and COM2 for connecting
a mouse or other pointing device.
Page 687: To Preserve Long Filenames with Disk Utilities that do not
Recognize Them
Online Help: To Preserve Long Filenames with Disk Utilities that do not
Recognize Them
Steps 5 and 6 for the "To preserve long filenames with disk utilities that
do not recognize them" state:
- Turn tunneling on again, and then restart the computer.
- At the command prompt, type lfnbk /r [drive] to restore long filenames.
These steps should be:
- At the command prompt, type lfnbk /r [drive] to restore long filenames.
- Turn tunneling on again, and then restart the computer.
Page 688: Technical Notes on Long Filenames
Online Help: Technical Notes on Long Filenames
- The "Long filenames cannot be used on SUBST drives" item is incorrect.
Long file names can be used on SUBST drives.
- The "To use friendly alias names instead of numeric tails" item is
incorrect. Windows 95 does not support the NameNumericTail setting.
This setting causes problems for any programs (including Windows 95
Setup, Microsoft Plus! for Windows 95 Setup, and the Add/Remove
Programs tool) that use the Program Files folder.
For more information, please see the following article in the
Microsoft Knowledge Base:
Q148594 "NameNumericTail=0" Value Causes Problems for Some
Programs
Page 689: Turning Off the Extended File System Features
Online Help: Technical Notes on Long Filenames
The "Turning off the extended file system features" and "To enable the
Windows 3.1 file system" sections are invalid because Windows 95 does not
support this. For example, if you edited the registry to include the
Win31FileSystem key, Windows 95 would ignored it.
Page 719: Creating an Apps.ini File
Online Help: Creating an Apps.ini File
The Creating An Apps.ini File section has two errors:
- The To Create An Apps.ini File topic does not include a step to add
the [AppInstallList] section. These are the correct steps:
- Use a text editor to create a file that contains a list of
applications using the following format:
[AppInstallList]
<application name> = [*] <UNC path>
For <application name>, substitute the name that you want users
to see on the Network Install tab. For <UNC path>, substitute the
network location of the Setup application. If a Setup application
cannot work with UNC names, include an asterisk before it. For
example:
word for windows=*\\applications\forusers\word60\setup.exe
- Save the Apps.ini file on a server to which users have read-only
access.
- The "To display the applications listed in Apps.ini on the Network
Install tab" topic incorrectly lists the registry key as:
Hkey_Local_Machine/SOFTWARE/Microsoft/Current Version
You should actually add a string value named appinstallpath
to the following registry key:
Hkey_Local_Machine/SOFTWARE/Microsoft/Windows/Current Version
The data for the "appinstallpath" value should be the UNC path to the
Apps.ini file, including the file name. For example:
\\<server>\<share>\<installpath>\apps.ini
Page 755: Limit on Number of Installed TrueType Fonts
Page 755 states:
Greater font flexibility. Because the fonts are stored in the
registry, you can install an unlimited number of TrueType fonts.
In addition, you can print almost 1000 fonts in any document.
This statement is not entirely true. Windows 95 does limit the number of
fonts to approximately 1000 for various reasons not related to registry
size limits. The exact number may vary depending on your configuration.
Page 766: Using DEC PrintServer Software for Windows 95
Online Help: Using DEC PrintServer Software for Windows 95
The steps "To install PrintServer Software for Windows 95" state the
following:
- In the Network option in Control Panel, click Add.
- In the Select Network Component Type dialog box, double-click
Service.
- In the Select Network Service dialog box, click DEC, and in the
Network Services list, click DEC Print Server. Click OK.
These steps should state:
- Click Start, point to Settings, and then click Printers.
- Double-click Add Printer and follow the onscreen instructions.
- In the list of Manufacturers, click Digital, and then click the
appropriate DEC PrintServer in the list of Printers.
Page 777: Loading Fonts in Windows 95
Online Help: Loading Fonts in Windows 95
The Notes in the Loading Fonts In Windows 95 section states: "Because
fonts are stored in the Registry, there is no limit to the number of
TrueType fonts that can be installed. In addition, almost 1000 fonts can
be used simultaneously, and the same number can be printed in the same
document."
This section should read: "Approximately 1000 TrueType fonts can be
installed in Windows 95. In addition, almost all of the installed fonts
can be used simultaneously, and the same number can be printed in the same
document. The 1000-font maximum occurs because of the size of Registry
keys and available storage space for font names in GDI."
Page 782: Graphic images don't print correctly or output is garbled
The first entry states: "Start the computer in Safe Mode, and then retry
printing."
This entry should be omitted. You can't print in Safe Mode (except to a
file).
Page 783: Printing is slower than normal
The first entry states: "Start the computer in Safe Mode, and then retry
printing."
This entry should be omitted. You cannot print in Safe Mode (except to a
file).
Page 784: To troubleshoot a computer that stalls while printing to a
local printer and network printer
The first entry states: "Start the computer in Safe Mode, and then retry
printing."
This entry should be omitted. You cannot print in Safe Mode (except to a
file).
Page 847: To Choose Which Profile to Use at Startup
The "To choose which profile to use at startup" section includes 5 steps.
This topic should end after the note in step 3 on page 848. After this
note, the following information should appear on page 848:
Setting up a Microsoft Mail workgroup postoffice consists of the following
tasks:
- Deciding the location for the postoffice
- Deciding who will administer the postoffice
- Adding users and user information, such as office locations and
passwords
- Sharing the postoffice with all users in the workgroup
To Set Up a Microsoft Mail Workgroup Postoffice:
- In Control Panel, click the Microsoft Mail Postoffice icon.
- In the Microsoft Workgroup Postoffice Admin dialog box, click Create
A New Workgroup Postoffice, and then click Next.
<The "Microsoft Workgroup Postoffice Admin" screen on page 848 appears
here>
Step 4 on page 848 should be step 3.
Step 5 on page 848 should be step 4.
The rest of pages 848 and 849 is correct.
NOTE: The Microsoft Windows 95 Resource Kit Help file contains the correct
information for this topic.
Page 896: To Install SLIP
Online Help: Configuring a Windows 95 Dial-Up Client
Step 2 of the "To Install SLIP" bulleted item states: "In the Install From
Disk dialog box, click the Browse button, and then type the path name to
ADM N\APPTOOLS\SLIP\RNAPLUS.INF."
Step 2 should read: "In the Install From Disk dialog box, click the Browse
button, and then type the path name to ADMIN\APPTOOLS\DSCRIPT\RNAPLUS.INF."
Page 899: Configuring a Windows 95 Dial-Up Server
This topic states: "Windows 95 must have special registry settings to act
as an IP router."
This information is incorrect. Microsoft does not support making changes
to the registry to enable Windows 95 to become an IP router. Microsoft
Windows NT Server version 3.5 can act as an IP router, but Microsoft
Windows 95 cannot. Windows 95 provides all the protocols you need to
connect to the Internet, but cannot act as an IP router.
Page 1019: Getting Started with Registry Editor
Online Help: Getting Started with Registry Editor
This topic states: "Registry Editor is not available with the Windows 95
floppy disks." Actually, Registry Editor is included on the Windows 95
floppy disks.
Registry Editor is located in the Win95_03.cab cabinet file for non-DMF
floppy disks, and in the Win95_02.cab cabinet file for DMF floppy disks.
Page 1066: Safe Mode Without Compression
Page 1066 lists a startup option named "Safe Mode Without Compression."
This startup option does not exist, and cannot be selected.
Page 1104: Native Windows 95 Commands
Online Help: Introduction of Native Windows 95 Commands
The MORE command is listed as an internal command. MORE is actually an
external command.
Page 1111: Incorrect Directory and Command List
Under the heading "Commands Not Included in Windows 95," there is a
list of commands located in the Other\Olddos folder on the Windows
95 CD-ROM.
This folder name is incorrect; it should be Other\Oldmsdos. Also,
some of the commands are not present in this folder.
BACKUP was a file backup utility included with MS-DOS versions 2.0
through 5.0. It was replaced by MSBACKUP in version 6.0. MSBACKUP is
in the Other\Oldmsdos folder, but BACKUP is not.
EDLIN was a line-oriented text editor included with MS-DOS versions
2.0 through 5.0. It was replaced by EDIT in MS-DOS version 5.0 and did
not appear at all in MS-DOS 6.0 or later. EDIT is also a Windows 95
command and is explained on page 1103 of the Windows 95 Resource Kit.
Page 1120: Xcopy Command-Line Switches
Online Help: Xcopy Command-Line Switches
This section of the Resource Kit states that "/exclude" is a valid switch
for the Windows 95 version of Xcopy. This switch is only valid for the
Windows NT version of Xcopy.
Pages 1159-1160: [Version] Section
Pages 1159-1160 of the Resource Kit state that the Signature line of the
[Version] section is "$Windows 95$." This is incorrect. The Signature line
is actually as follows:
[Version]
Signature="$Chicago$"
NOTE: The Microsoft Windows 95 Resource Kit Help file contains the correct
information.
Pages 1161-1162: [Install] Section
Online Help: Windows 95 INF Files: [Install] Section
The "Reboot=1" or "Restart=1" entry in the [Install] section of an .Inf
file does not restart or reboot the computer after the items in the
[Install] section are processed as described on these pages.
Page 1182: [InstallLocationsMRU]
Online Help: [InstallLocationsMRU]
The [InstallLocationsMRU] section gives the following example:
[InstallLocationsMRU]
mru1=a:\
mru2=c:\
mru3=\\winserver\source
This example should state:
[InstallLocationsMRU]
\\server\share\folder=mru1
c:\win95=mru2
\\winserver\source=mru3
Page 1193: MSBATCH.INF Parameters
Online Help: netcard_ID
In the [*PNP812D] section, the line that reads "Interrupt=" should read
IRQ=.
Page 1194: DNS Servers
Online Help: DNS Servers, MSBATCH.INF Parameters
The Values description states:
Comma-separated list of DNS server names.
This description should read:
Comma-separated list of DNS server IP addresses.
Page 1200: [Printers]
Online Help: [Printers]
The [Printers] section contains the following example:
[Printers]
"My BJC600"="Canon Bubble-Jet BJC-600",LPT1
"IIIsi Next Door"="HP Laserjet IIIsi",\\Server_1\PrtShr_1
This example should state:
[Printers]
My BJC600=Canon Bubble-Jet BJC-600,LPT1
IIIsi Next Door=HP Laserjet IIIsi,\\Server_1\PrtShr_1
Page 1206: MSBATCH.INF Sample File
Online Help: MSBATCH.INF Sample File
The MSBATCH.INF Sample File topic contains the following example:
[InstallLocationsMRU]
MRU1=C:\WINDOWS
MRU2=C:\USER
MRU3=\\win_svr\source files\home_dir
This example should state:
[InstallLocationsMRU]
\\server\share\folder=MRU1
c:\win95=MRU2
\\winserver\source=MRU3
Page 1209: Windows 95 Network Adapter INF Summary: Intel
Online Help: Windows 95 Network Adapter INF Summary: Intel
The section heading that reads "[*PNP812]" should read [*PNP812D].
Page 1243: Customizable Display for Mouse Pointer
Online Help: Customizable Display for Mouse Pointer
This topic states that the CD-ROM version of Windows 95 contains color
schemes for mouse pointers. This information is incorrect. Windows 95 does
not include color schemes for mouse pointers.
Page 1257: Getting Answers to Your Technical Questions
Online Help: Getting Answers to Your Technical Questions
The sixth bulleted item of this section states:
Get technical support from a Microsoft engineer. Support is available
for no charge from a Microsoft PSS engineer, by means of a toll line,
for the first 90 days of using Windows 95. The 90-day period begins the
day of your first call. Call (425) 637-7098 between 6:00 A.M. and 6:00
P.M. Pacific time, Monday through Friday, excluding national holidays.
For support outside the United States, contact your local Microsoft
subsidiary.
After the initial 90-day free period has expired, support is available
from a Microsoft PSS engineer and charged by the length of time used or
by the occurrence. Call (800)
936-5700 ($25 per incident). For support outside the United States,
contact your local Microsoft subsidiary.
Support for Microsoft TCP/IP for Windows 95 is not available from the
standard Windows 95 PSS phone lines. To request TCP/IP support for
Windows 95, please contact a Microsoft Solution Provider or enroll in
one of the Microsoft fee-based support plans. For further information,
call the Microsoft Sales Information Center at (800) 426-9400.
This item should read:
Get technical support from a Microsoft engineer. Support is available
for no charge from a Microsoft PSS engineer, by means of a toll line,
for the first 90 days of using Windows 95. The 90-day period begins the
day of your first call. Call (425) 635-7000 between 6:00 A.M. and 6:00
P.M. Pacific time, Monday through Friday, excluding national holidays.
For support outside the United States, contact your local Microsoft
subsidiary.
After the initial 90-day free period has expired, support is available
from a Microsoft PSS engineer. Call (800) 936-5700 ($35 per incident).
For support outside the United States, contact your local Microsoft
subsidiary.
Support for Microsoft TCP/IP for Windows 95 is available from the
Windows 95 fee-based support line.
For phone numbers and support options on all Microsoft products,
please see the information available on the Microsoft Web site at
http://www.microsoft.com/support/supportnet/overview/overview.asp.
Additional query words:
rkit drdos dr-dos dr dos novell wrk
Keywords : win95
Version : WINDOWS:95
Platform : WINDOWS
Issue type :
|