Iomega Zip Drive on Parallel Port Not Detected

ID: Q137050

The information in this article applies to:
  • Microsoft Windows 95

SYMPTOMS

When you install Windows 95 or run the Add New Hardware Wizard, an Iomega Zip Drive connected to a parallel port on your computer is not detected.


CAUSE

By design, Windows 95 cannot detect these drives.


RESOLUTION

You can manually install the protected-mode driver for an Iomega Zip Drive using the Add New Hardware tool in Control Panel. To do so, follow these steps:

  1. In Control Panel, double-click the Add New Hardware icon, and then click Next.


  2. Click No, and then click Next.


  3. In the Hardware Types box, click Other Devices, and then click Next.


  4. In the Manufacturers box, click Iomega, and then click Have Disk.


  5. In the Copy Manufacturer's Files From box, type the location of the driver files on the CD-ROM, and then click OK. For example, type:
    d:\drivers\storage\iomega


  6. Click Next to install the driver.


You can install the driver whether or not a Zip Drive is currently connected to the parallel port.

The protected-mode driver is located in the Drivers\Storage\Iomega folder on the Windows 95 CD-ROM, or you can obtain the driver directly from Iomega.

NOTE: After you install the protected-mode driver, make sure to remove the real-mode drivers for the Zip Drive from the Config.sys and Autoexec.bat files. For information about removing these drivers, please consult the Zip Drive's documentation or manufacturer.

Additional query words: guest.exe

Keywords : win95 windrvr
Version : 95
Platform : WINDOWS
Issue type :


Last Reviewed: May 28, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.