Changing Modem for DUN Connectoid Restores Default Settings

ID: Q137868


The information in this article applies to:
  • Microsoft Windows 95


SYMPTOMS

When you change the modem that a Dial-Up Networking connectoid is configured to use, the settings for that connectoid return to their default values. These settings include modem-specific settings such as speaker volume and maximum speed, and also include settings such as the type of Dial-Up server you are connecting to and the TCP/IP settings to use (if you use TCP/IP). If you change back to the modem the connectoid was originally configured to use, the settings are not restored.


CAUSE

In a Dial-Up Networking connectoid, all settings except the phone number are associated with a specific modem. If you change the modem a connectoid is configured to use, the settings are returned to their default values.


RESOLUTION

To resolve this issue, use either of the following methods:

  • If you need to use two different modems with a Dial-Up Networking connectoid, create two connectoids, each of which is configured to use one of the modems.


  • Install the Dial-Up Networking 1.3 Upgrade. For information about the Dial-Up Networking 1.3 Upgrade, please see the following article in the Microsoft Knowledge Base:
    Q191494 Dial-Up Networking 1.3 Upgrade Available


Additional query words: dun

Keywords : dun wintapi win95 wincomm
Version : 95
Platform : WINDOWS
Issue type : kbprb


Last Reviewed: June 3, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.