Err Msg: Client Service for NetWare. Unable to Complete...
ID: Q140442
|
The information in this article applies to:
SYMPTOMS
When you try to access a Windows 95-based computer acting as an NCP server
(NWSERVER) from an MS-DOS session using the Microsoft NCP Client (NWREDIR),
you may receive the following error message on a blue screen:
Client Service for NetWare
Unable to complete a background operation on connection to <server>.
Select Retry to try the operation again, or press Escape to cancel
all outstanding background operations on this connection.
Operation: File Write
Error: 0x33 'No Response'
CAUSE
This error can occur if the NCP server was shut down after a connection or
drive mapping was made and data was transferred between the two computers.
Any additional data transfers to the unavailable server result in the error
message.
RESOLUTION
Verify that the Windows 95 NCP server you are trying to connect to is
running and that the File and Printer Sharing for NetWare Networks service
is loaded.
To determine whether the File and Printer Sharing for NetWare Networks
service is loaded, follow these steps at the server:
- In Control Panel, double-click the Network icon.
- Check the "The following network components are installed" box to see
if the File and Printer Sharing services is loaded.
If the File and Printer Sharing service is not loaded, follow these steps
to load it:
- Click Add, click Services, and then click Add.
- In the Manufacturers box, click Microsoft. In the Network Services
box, click File and Printer Sharing for NetWare Networks.
- Click OK or Close until you return to Control Panel.
- When you are prompted to restart your computer, do so.
MORE INFORMATION
Press the ESC key to recover from the blue error message screen.
Keywords : win95
Version : 95
Platform : WINDOWS
Issue type :