Err Msg: Incompatible Parameters: Sector Size Adjusted

• Microsoft Windows 95

SYMPTOMS

When you try to use Ramdrive.sys with a sector size of 128 or 256 bytes, you receive the following error message when Ramdrive.sys is loaded:

Incompatible Parameters: Sector Size Adjusted

CAUSE

The version of Ramdrive.sys included with Windows 95 does not support a sector size of 128 or 256 bytes.

RESOLUTION

To work around this problem, follow these steps:

1. Copy the Ramdrive.sys file from an earlier version of MS-DOS to the Windows folder on the hard disk.



2. Type the following command at a command prompt

   setver <hdisk>:\<windows> ramdrive.sys <ms-dos version>

   where <hdisk> is the hard disk, <windows> is the Windows folder, and <ms-dos version> is the 3-digit version of MS-DOS from which you copied the Ramdrive.sys file.
   
   For example, if Windows 95 is installed in the Windows folder on drive C, and you copied the Ramdrive.sys file from version 6.2 of MS-DOS, type the following line:

   setver c:\windows ramdrive.sys 6.20




3. Modify the Config.sys file so that Setver.exe is loaded before Ramdrive.sys.



4. Restart your computer.

STATUS

Microsoft has confirmed this to be a problem in Microsoft Windows 95. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

Keywords : diskmem win95
Version : 95
Platform : WINDOWS
Issue type :