How to Change SPIDs in Windows 95

• Microsoft Windows 95

SUMMARY

This article describes how to check or change the SPID settings in Windows 95 after you have installed the ISDN Accelerator Pack for Internet Explorer 2.0

MORE INFORMATION

A Service Provider ID (SPID) is the number by which an ISDN service provider is known. This number is critical to establishing two-way communications using ISDN phone services.

To check or change the SPID settings in Windows 95, perform the following steps:

1. In My Computer, double-click Dial-Up Networking.



2. Use the right mouse button to click a connection, and then click Properties on the menu that appears.



3. Verify that the ISDN adapter is selected in the Connect Using box.



4. Click Configure, and then click Advanced.



5. Compare the SPIDs to the numbers provided by the telephone company. If the SPIDs are incorrect, you cannot connect using ISDN.



6. If you were provided a voice SPID and a data SPID, the data SPID should be entered in the Channel 1 field. If the SPIDs are voice/data, they can be entered in any order.



7. If the SPIDs are incorrect, click Modify. A Channel Settings dialog box should be displayed. If not, click the channel number so select the SPID to change, and then click Modify again.
   
   NOTE: Make sure to click the number. Clicking too far to the right does not work.
   
   After you modify the SPID, click OK. You must click the second channel number and click Modify to edit another SPID. A line may have one or two SPIDs.



8. Click OK until all dialog boxes are closed.

Keywords : win95 wincomm
Version : 95
Platform : WINDOWS
Issue type :