1.44-MB Media DriveSpace Upgrade in 120-MB Floptical Drive

ID: Q167872

The information in this article applies to:
  • Microsoft Windows 95 OEM Service Release version 2
  • Microsoft Windows 95 OEM Service Release version 2.1

SYMPTOMS

When you attempt to perform a DriveSpace 3 upgrade on a 1.44-MB floppy disk compressed with a previous version of DoubleSpace or DriveSpace in a 120-MB drive, the DriveSpace 3 upgrade may not succeed.


CAUSE

DriveSpace does not prompt you for the type of media in the drive.


RESOLUTION

If the upgrade is not successful, data from the floppy disk may be in any of the following locations:

  • The host of the unmounted compressed volume file (CVF).


  • The Drvspace.000 CVF.


  • The Dblspace.030 or Drvspace.030 CVF.


To recover data from the host of the unmounted CVF, or from the Drvspace.000, Dblspace.030, or Drvspace.030 CVF, insert the floppy disk in the 1.44-MB floppy disk drive A or B. Then, copy any data files from the floppy disk to a folder on the hard disk.

To recover data in the unmounted Drvspace.000 CVF in the root folder of the floppy disk, use the following steps:
  1. Click the Start button, point to Programs, point to Accessories, point to System Tools, and then click DriveSpace.


  2. Click the drive letter of the inserted floppy.


  3. On the Advanced menu, click Mount.


  4. Copy the data from the compressed floppy disk to a folder on the hard disk.


  5. On Advanced menu, click Unmount.


To recover data in either the unmounted Dblspace.030 or Drvspace.030 CVF, use the following steps:
  1. At a command prompt, change the attributes of the Drvspace.030 or Dblspace.030 file in the root folder of the floppy disk. To do so, change to the root folder of the floppy disk and then type the following line
    attrib -s -h -r <filename>
    where <filename> is either Dblspace.030 or Drvspace.030.


  2. Copy the Dblspace.030 or Drvspace.030 file to the root of an uncompressed hard disk.


  3. In DriveSpace, click the drive letter that the Dblspace.030 or Drvspace.030 file was copied to.


  4. On the Advanced menu, click Mount.


  5. Copy the data from the floppy disk to a folder on the hard disk.


  6. On Advanced menu, click Unmount.



STATUS

Microsoft has confirmed this to be a problem in Windows 95 OEM Service Release 2 (OSR2). We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

Additional query words: 95

Keywords : kbtool osr2 drvspace win95
Version : 95
Platform : WINDOWS
Issue type :


Last Reviewed: July 7, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.