Jumper Settings For PC Network/Baseband Adapters

ID: Q32847

The information in this article applies to:

Microsoft Windows versions 1.x, 2.x, 3.0, 3.0a, 3.1, 3.11

SUMMARY

This article discusses jumper settings for the IBM PC Network Adapter and Baseband Adapter for both file servers and bridges.

The following are jumper-configurable parameters for the PC Network Adapter/Baseband adapter and conflicts that may occur:

The Interrupt Line address may conflict with devices such as the Microsoft Bus Mouse, hard drive controllers, serial and parallel ports.

The Base I/O address may conflict with expanded memory boards.

The Memory Map Address may conflict with the memory addresses used by expanded memory board drivers, 3270 cards, ESDI hard-drive controllers, and display adapters.

It may be necessary to change jumper settings on the PC Network Adapter and/or other cards in the system to avoid such conflicts.

MORE INFORMATION

The following are Interrupt Jumper Settings:


   (Jumper W1)
   Interrupt 2 - pins 1 & 2 jumpered
   Interrupt 3 - pins 2 & 3

The following are Base I/O Address Jumper Settings:


   (Jumper W4)
   Address 620-627 - pins 1 & 2 jumpered
   Address 628-62F - pins 2 & 3

The following are Memory Address Jumper Settings:


   (Jumper W5)
   Address CC00-CDFF - pins 1 & 2 jumpered
   Address DC00-DDFF - pins 2 & 3 jumpered

Additional query words: 1.x 2.03 2.10 2.11 3.00 3.00a 3.10 3.11 win30 win31

Keywords :
Version : WINDOWS:1.x,2.x,3.0,3.0a,3.1,3.11
Platform : WINDOWS
Issue type :