Presentation Mode Not Working on PaintJet XL in Windows 3.0

ID: Q63823

The information in this article applies to:
  • Microsoft Windows versions 3.0, 3.0a

SUMMARY

You must check the Presentation Mode box from the Printer Setup menu of Control Panel to print in presentation mode on a Hewlett-Packard (HP) PaintJet XL printer with Microsoft Windows version 3.0. If the Presentation Mode box is not checked, Windows will reset the printer to normal mode, perform its print job, then return the printer to presentation mode. This happens even if the switches on the printer are set to presentation mode.


MORE INFORMATION

To print from presentation mode with Windows 3.0, do the following:

  1. From the Main group of Program Manager, choose Control Panel.


  2. From Control Panel, choose Printers.


  3. Choose the HP PaintJet printer and select Configure.


  4. From the Printers - Configure menu, choose Setup.


  5. Choose Options and then check the Presentation Mode box.


When Presentation Mode is selected, the PaintJet XL uses an interlace technique that gives you improved print quality. However, printing time is increased.

Additional query words: 3.00 3.0 3.0a 3.00a 3rdparty

Keywords :
Version : WINDOWS:3.0,3.0a
Platform : WINDOWS
Issue type :


Last Reviewed: December 8, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.