The information in this article applies to:
SUMMARY
Microsoft Windows version 3.0 does not run properly in enhanced mode
on machines equipped with Bus Master cards unless SMARTDrive is also
running. The new SCSI drive controllers are an example of such a
system. If SMARTDrive is not running, Windows 3.0 may stop responding (hang
or crash) in enhanced mode on these systems.
MORE INFORMATIONDouble buffering is a concept that addresses some problems with certain types of hardware. The definition of double buffering, in the case of SMARTDrive, is as follows: ALL read/write operations to any SMARTDrive managed drive will always be done through the SMARTDrive-managed low- memory buffer regardless of any other parameters of the read/write. In other words, the read/write address for the operation passed to the hardware will ALWAYS be the address of a buffer inside SMARTDrive. The data is transferred from/to the real address for the operation, to/from the SMARTDrive buffer at an appropriate time (before or after the request) for the operation.This is important because a Bus Master DMA hard disk controller does NOT use the system DMA controller, (that's why it's called a BUS master card). For Windows enhanced mode, this would normally be a problem. Since the Bus Master hardware is not "virtualized," like the system DMA controller is, the correct linear to physical address mapping isn't performed for the read/write operation. This means that the read/write may be performed to the incorrect physical address and the system will crash. By turning on double buffering in SMARTDrive (this is done automatically by enhanced-mode Windows), all read/write operations to the drive are transferred through a low-memory SMARTDrive buffer where the following is true: linear address = physical addressAs a result the Bus Master disk hardware needs to be virtualized because it's been arranged, through SMARTDrive double buffering, for all read/write operations to the disk to occur at an address where Linear=Physical. Most of the new SCSI drive controllers are examples of such Bus Master Cards. If you don't load SMARTDrive, these disks do NOT work with enhanced-mode Windows. If you load SMARTDrive, they DO work. The reason is the double buffering that SMARTDrive is told to do when enhanced mode is operating. Double buffering has a performance impact on overall disk performance. This cost is judged to be "worth the benefit" of getting the product to work on a broader range of MS-DOS platforms. If you want to learn more about the importance/relevance of Linear versus Physical addresses, and how this impacts the operation of transfers to/from a hardware device in the MS-DOS context, check the local bookstore for a book on the operation of virtual memory, in paging operating systems, that uses an operating system operating on the Intel 80386 processor as its standard "working example." An example is "The 80386 Book," by Ross P. Nelson, published by Microsoft Press. Additional query words: 3.00 3.0 3.0a 3.00a SmartDrive.sys winmem win30
Keywords : |
|
Last Reviewed: October 4, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |