Replace Novell 3.01 or Later Capture With 2.12 Capture

• Microsoft Windows versions 3.0, 3.0a

SUMMARY

The new CAPTURE.EXE file shipped with the MS-DOS Windows SHELL Kit version 3.01 or later is known to cause extreme delays and corrupted print jobs when it is used with a Novell 2.12 dedicated or non-dedicated server.

If you experience printing problems when you use Novell NetWare version 2.12 with Microsoft Windows version 3.00, you may need to replace the CAPTURE.EXE file. The CAPTURE.EXE file shipped with the MS-DOS Windows SHELL Kit version 3.01 or later should be replaced with the CAPTURE.EXE shipped with Novell NetWare version 2.12. The CAPTURE.EXE file is normally located in the Z:\PUBLIC directory.

MORE INFORMATION

Follow the steps below to replace this file:

1. Exit Windows.



2. Change to the Z:\PUBLIC directory where the Novell utilities are kept.



3. Type FLAG CAPTURE.EXE SRW. Note that you may have to be logged in as a supervisor to do this.



4. Place the Novell PUBLIC2 disk in drive A.



5. Type COPY A:CAPTURE.EXE (3/1/89) Z:\PUBLIC .



6. Type FLAG CAPTURE.EXE SRO.



7. Log out and then reboot.



8. Restart your network session.

Additional query words: 3.00 3.0 3.0a 3.00a win30

Keywords :
Version : WINDOWS:3.0,3.0a
Platform : WINDOWS
Issue type :