PRINTERS.INI Needed to Add PostScript Printers from SDL

• Microsoft Windows versions 3.0, 3.0a

SUMMARY

To add support for a new PostScript printer from the Supplemental Driver Library (SDL), the disk must contain a PRINTERS.INI file to display the dialog box with the list of printers. Without the PRINTERS.INI file, the Add Printers dialog box will continue to prompt you to insert the disk containing the new printer file in drive A or to choose an alternate directory even though the *.WPD files are present. The PRINTERS.INI file and WPD files must be in the same directory.

To add support for a new PostScript printer from the SDL, do the following:

1. From the Control Panel, choose Printers.



2. Select PostScript Printer from the Installed Printers list and select Configure.



3. Select Setup from the Printers-Configure dialog box and then select Add Printer.



4. You will be prompted to place the disk containing the new printer file in drive A. Place SDL Disk #4 (5.25" disks) or Disk #7 (3.5") in drive A and select OK.



5. Select the appropriate printer driver from the list and select OK.

MORE INFORMATION

The PRINTERS.INI file is an ASCII text file that contains a listing of the available PostScript support WPD files. Below is a listing of the PostScript Drivers contained in the Windows 3.00 SDL PRINTERS.INI file:

   [PSCRIPT]
   HPIII522=HP LaserJet III PostScript v.52.2
   HPIIP522=HP LaserJet IIP PostScript v.52.2
   HPIID522=HP LaserJet IID PostScript v.52.2
   ibm17521=IBM 4019 v52.1 (17 Fonts)
   ibm39521=IBM 4019 v52.1 (39 Fonts)
   N2090522=NEC Silentwriter2 90 v52.2
   N2290520=NEC Silentwriter2 290 v52.0
   OL840518=Oki OL840/PS v51.8
   Q2200510=QMS-PS 2200 v51.0
   Q820_517=QMS-PS 820 v51.7
   TIM17521=TI microLaser PS17 v52.1
   TIM35521=TI microLaser PS35 v52.1
   U9415470=Unisys AP9415 v47.0 

installation and WPD

Additional query words: 3.00 3.0 3.0a 3.00a

Keywords :
Version : WINDOWS:3.0,3.0a
Platform : WINDOWS
Issue type :