NEC Prospeed 386 with Math Coprocessor May Hang Windows Setup

ID: Q68752


The information in this article applies to:
  • Microsoft Windows versions 3.0, 3.0a


SUMMARY

The NEC Prospeed 386 Laptop may stop responding (hang) during Microsoft Windows setup if a math coprocessor is installed and the jumper to the left of the math coprocessor is set incorrectly.

The jumper has three pins. The default settings are pins 2 and 3. Windows requires that the jumper be set to pins 1 and 2. This has been confirmed by NEC technical support.

NEC Prospeed users should contact NEC technical support or their dealer for correct installation instructions.


MORE INFORMATION

If you are using the NEC Docking Station, then the regular AUTOEXEC.BAT and CONFIG.SYS files are ignored and files named AUTOEXEC.DS and CONFIG.DS are used. You also need to add /M:7 to the HIMEM.SYS line:

device=c:\HIMEM.SYS /M:7
The NEC Prospeed 386 Laptop Computer is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

Additional query words: 3.00 3rdparty WIN30 3.0 3.00a 3.0a KBHW

Keywords :
Version : WINDOWS:3.0,3.0a
Platform : WINDOWS
Issue type :


Last Reviewed: December 9, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.