Using Microsoft Serial Mice with Leading Edge Computers
ID: Q69195
|
The information in this article applies to:
-
Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11
-
Microsoft Windows for Workgroups versions 3.1, 3.11
SUMMARY
Some Leading Edge Computers (Model D3/SX) contain a built-in proprietary
mouse port. To use a Microsoft serial mouse on a serial communications
port, instead of using Leading Edge's mouse, you must disable the built-in
mouse port.
MORE INFORMATIONSteps to Setup Microsoft Serial Mouse
- Disable the built-in mouse port by moving jumper 15 on the
motherboard from pins 1 and 2 to 2 and 3.
- Connect the serial mouse to COM1 or COMx, where x is the COM port
of your choice.
- Check to ensure Windows is configured for the appropriate mouse
driver (Microsoft or IBM PS/2 for example).
NOTE: There have been no reported problems with the Microsoft Bus
Mouse conflicting with the built-in mouse port.
Additional query words:
Keywords :
Version : WINDOWS:3.0,3.0a,3.1,3.11
Platform : WINDOWS
Issue type :
|