The information in this article applies to:
SYMPTOMS
If you run Microsoft Windows version 3.0 in enhanced mode on a Novell
network with a DCA Irmatrak Token ring board, you may not be able to see
files on a network drive within File Manager, and the print servers may not
show up when you select the network printers in Control Panel.
CAUSEThis is a known problem with the DCA Network drivers supplied with the card. WORKAROUNDThere are two methods you can use to work around these problems:
MORE INFORMATIONTo resolve the problem on a more permanent basis, you need to update your driver files. Check if the following Novell files are earlier than version 3.02 or have dates earlier than the following:
These files can be downloaded via NETWIRE on COMPUSERV. To get them,
type "GO NOVLIB" and then download the WINUP2.ZIP file.
Version 1.10 is the minimum required to correct the problem. If you have version 1.10 or later, you do not need the updated Novell files above. You can obtain a current version of the DCA network drivers from the DCA Update Department. The products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability. Additional query words: 3.0 3.00 win30 3rdparty 3.00a
Keywords : |
Last Reviewed: December 2, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |