Windows Err Msg: System Integrity Violation

• Microsoft Windows versions 3.0, 3.0a

SUMMARY

There are two major causes of System Integrity Violations:

• There is a hardware conflict.
  
  -or-



• An MS-DOS application running under Windows is trying to access memory that it does not have access to in Windows.

MORE INFORMATION

If the System Integrity Violation error message occurs when you run a non- Windows application from Windows in enhanced mode, follow these steps:

1. Use a AUTOEXEC.BAT file that looks like:

   
         Path C:\Windows;C:\;C:\DOS
         Prompt $p$g
         Set Temp=C:\Windows\Temp 

   This example assumes that Windows is in C:\WINDOWS and that MS-DOS is in C:\DOS.



2. Use a CONFIG.SYS file that looks like:

   
         Files=60
         Buffers=10
         Shell=c:\Command.com /p /e:2048
         Device=c:\Himem.Sys 

   This example assumes HIMEM.SYS is in the root directory of drive C.



3. Make sure the MS-DOS application is being called from a program information file (PIF).



4. Check to see if a System Integrity Violation still occurs. If it does, continue with step 5. Otherwise, the application's problem was cleared up in either the AUTOEXEC.BAT, CONFIG.SYS, or the PIF.



5. Try running Windows in standard mode.



6. If the program runs under Windows in standard mode, add these two lines to the [386Enh] section of SYSTEM.INI and then try running Windows in enhanced mode:

   
         EmmExclude=A000-C7FF
         EmmExclude=E000-EFFF (for some programs E000-FFFF) 




7. If step 5 does not work and your AUTOEXEC.BAT and CONFIG.SYS files read as above, the application may be incompatible with Windows or you have a hardware conflict of some type.

Additional query words: 3.00 3.0 3.0a 3.00a tshoot

Keywords :
Version : WINDOWS:3.0,3.0a
Platform : WINDOWS
Issue type :