MicroMASTER 486, SCSI Adapter: Problems with 386/Enhanced Mode

ID: Q82080

The information in this article applies to:

Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11

SUMMARY

The MicroMASTER 486, AOX Inc.'s upgrade card for the IBM PS/2, may require a virtual device driver with certain SCSI adapters for proper Windows 386 enhanced mode operation.

MORE INFORMATION

The MicroMASTER upgrades the processor of an IBM PS/2. If an upgrade board and a SCSI adapter are both present, you may need to add the virtual device driver MMVDMAD.386 to the [386Enh] section of the SYSTEM.INI file.

Two 386 enhanced mode problems may occur:

Windows installed on the SCSI drive doesn't run.

Windows installed on a second, non-SCSI drive in a dual hard drive system cannot access the SCSI drive.

These problems can be corrected by installing the MMVDMAD.386 virtual device driver.

Copy the file MMVDMAD.386 from the MicroMASTER option disk to the Windows SYSTEM subdirectory, and add the following line to the [386Enh] section of the SYSTEM.INI file:

Device=MMVDMAD.386

The products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

REFERENCES

"MicroMASTER 486 User's Guide," page 35

Additional query words: 3.00 3.00a 3.0 3.0a 3.1 3.10 3.11

Keywords :
Version : WINDOWS:3.0,3.0a,3.1,3.11
Platform : WINDOWS
Issue type :