Sound Blaster Configuration Changes with ATI Stereo FX Board
ID: Q85548
|
The information in this article applies to:
-
Microsoft Windows versions 3.1, 3.11
SYMPTOMS
When you start Windows version 3.1 with an ATI Stereo FX Board
installed and you are using the Creative Labs Sound Blaster 1.0
Driver, you may receive the following error message:
A configuration or hardware problem has occurred. Use the Driver
option in Control Panel to reconfigure the Sound Blaster driver
Attempts to change the Control Panel Setup information for the
driver have no effect.
WORKAROUND
- Use the RESET.EXE file to reset the Stereo FX Board. The Reset
command can be placed in your AUTOEXEC.BAT file, run from MS-DOS
Prompt under Windows, or added as an icon in your Startup Group.
- ATI's Setup program (SPX.EXE) can be used to reset the Stereo FX
Board. This can be done as follows:
- Run SFX.EXE (either outside of Windows, or from the MS-DOS
Prompt under Windows).
- Select Set Power-up Configuration.
- Press F10 to save the settings.
- Press the ESC key.
According to ATI Technologies product support, ATI is aware of the
problem.
Additional query words:
3.10 3.1 3.11 reconfigure stereo*fx
Keywords :
Version : WINDOWS:3.1,3.11
Platform : WINDOWS
Issue type :