Cannot Print in Draft Mode with Okidata Printers

ID: Q86627


The information in this article applies to:
  • Microsoft Windows versions 3.1, 3.11


SUMMARY

The drivers included for Okidata printers always print in near letter quality (NLQ) or letter quality (LQ) mode, whichever is the highest available mode. You cannot print in the Utility or High Speed Draft modes.


RESOLUTION

Microsoft has confirmed this to be a problem in the Okidata printer drivers version 1.0. OKI drivers version 2.0 corrects this problem for the Okidata 24 pin printers.


MORE INFORMATION

When you print using the device fonts on Okidata printers, changing the Print Quality to Draft in the Print Setup dialog box does not affect the printing speed or quality. The printer still prints in the highest available mode, either NLQ or LQ.

This applies to the following drivers and printers.

OKI24.DRV Version 1.0

  • Okidata ML 380


  • Okidata ML 390


  • Okidata ML 390 Plus


  • Okidata ML 391


  • Okidata ML 391 Plus


  • Okidata ML 393


  • Okidata ML 393 Plus


  • Okidata ML 393C


  • Okidata ML 393C Plus


OKI9.DRV Version 1.0

  • Okidata ML 192


  • Okidata ML 192 Plus


  • Okidata ML 193


  • Okidata ML 193 Plus


  • Okidata ML 320


  • Okidata ML 321


OKI9IBM.DRV Version 1.0

  • Okidata 92/93 IBM


  • Okidata ML 192 IBM


  • Okidata ML 193 IBM


  • Okidata ML 320 IBM


  • Okidata ML 321 IBM


Additional query words: microline micro line 3.10 3.11

Keywords :
Version : WINDOWS:3.1,3.11
Platform : WINDOWS
Issue type :


Last Reviewed: December 2, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.