Windows Err Msg: The LPTx Port Is Currently Assigned...
ID: Q87448
|
The information in this article applies to:
-
Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11
-
Microsoft Windows for Workgroups versions 3.1, 3.11
SYMPTOMS
When you try to print from an MS-DOS-based application in Windows or
Windows for Workgroups running in 386 enhanced mode, you receive the
following error message:
The LPTx port is currently assigned to a DOS Application.
Do you want to reassign the port to Windows?
CAUSE
This error occurs when:
- After Dark version 2.0 installed.
-or-
- You are using the PRINTMAN.EXE file provided with the Hewlett-Packard
(HP) 4L (71,024 bytes in size) with Windows for Workgroups.
WORKAROUND
To work around this problem:
- Set the Idle time on the printer port to 1 or 2, or change the device
contention to NEVER WARN.
-or-
- Remove After Dark.
-or-
- Expand PRINTMAN.EX_ from the original Windows for Workgroups 3.1 or
3.11 disks.
Workaround 1
- In the Main group, run Control Panel.
- Choose the 386 Enhanced icon.
- Select the correct printer port (for example, LPT1).
- Change the Idle time from a default of 60 to 1 or 2.
- Choose OK.
Workaround 2
- In the Main group, run Control Panel.
- Choose the 386 Enhanced icon.
- Select the correct printer port (for example, COM1).
- Set Device Contention to Never Warn.
- Choose OK.
NOTE: Windows 3.1 and 3.11 do not include the option to set the device
contention for LPT ports. To gain this functionality, you must obtain
VPD386.EXE and install VPD.386. For more information about VPD386.EXE,
query on vpd386 in the Microsoft Knowledge
Base.
MORE INFORMATION
After Dark is manufactured by Berkeley Systems, a vendor independent of
Microsoft; we make no warranty, implied or otherwise, regarding this
product's performance or reliability.
Additional query words:
afterdark after dark screensaver screen saver 3.00 3.00a 3.0 3.0a 3.10 after-dark berkley star trek startrek 3.11 LPT1 LPT2
Keywords :
Version : WINDOWS:3.0,3.0a,3.1,3.11
Platform : WINDOWS
Issue type :