FaceLift Err Msg: Data in Section of WIN.INI...

• Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11

SYMPTOMS

When using Bitstream FaceLift, you may receive one of the following two error messages when you attempt to print from a Windows-based application:

Data in section "Shell devices" in WIN.INI is corrupted or SHELL PRT is directly assigned

-or-

Shellprt directly assigned in shell devices

CAUSE

These messages indicate that Bitstream FaceLift is installed and not functioning correctly. Contact Bitstream technical support for help in correcting this error message.

Bitstream FaceLift replaces the drivers listed for the printer devices under the [devices], [PrinterPorts], and [Shelldevices] sections of the WIN.INI file with its own printer driver. The error message above specifically relates to an invalid entry in the [Shelldevices] section.

WORKAROUNDS

The error messages can be caused by any of the following conditions:

• There is an invalid entry in FaceLift's [Shelldevices] section.
  
  Solution
  
  
  1. Run the FaceLift icon and select Parameters.
     
     NOTE: If you can't find the icon, from Program Manager, open the File menu and choose Run. On the Command Line type facelift and choose OK. (FACELIFT.EXE is installed in the Windows directory so you don't need to specify a drive or directory.)
  
  
  
  2. Clear the FaceLift active box.
  
  
  
  3. Choose OK.
  
  
  
  4. Select Printers and unassign the FaceLift shell-driver.
  
  
  
  5. Exit and restart Windows.
  
  
  
  6. Reinstall FaceLift.
  
  
  



• A default printer has not been selected in the Windows Control Panel.
  
  Solution
  
  
  1. Run Control Panel and choose the Printers icon.
  
  
  
  2. Check and make sure that there is a default printer selected.
  
  
  



• A Windows version 3.0 printer driver is assigned to the same printer port as a Windows version 3.1 driver.
  
  Solution
  
  
  1. Run Control Panel and choose the Printers icon.
  
  
  
  2. Remove or change the port that the Windows 3.0 driver uses.
  
  
  



• The Atech PowerPak printer driver is on the same port as a Hewlett-Packard (HP) LaserJet driver.
  
  Solution
  
  
  1. Run Control Panel and choose the Printers icon.
  
  
  
  2. Remove or change the port that is being used by one of these font applications.
  
  
  

Additional query words: 3.00 3.00a 3.10 err msg 3.11 3rdparty

Keywords :
Version : WINDOWS:3.0,3.0a,3.1,3.11
Platform : WINDOWS
Issue type :