The information in this article applies to:
SUMMARYWhen using the NEC LC-890 printer with Microsoft Windows, set the printer to use batch mode, set the wait state to infinite, and make sure the printer is using ROM version 47.0, revision 2.0. MORE INFORMATIONROM VersionThe NEC LC-890 should have ROM version 47.0, revision 2.0 or later for proper operation with Windows. The ROM revision number is printed on the page when the LC-890 does a self-test. Using an earlier ROM version may cause clipped text when printing from Notepad or Calendar.Batch ModeThe NEC LC-890 PostScript printer may print black boxes in areas instead of graphics when set to interactive mode. The LC-890 must be set to batch mode to print graphics in Windows. According to NEC, interactive mode should only be used by programmers. Programmers can send codes to the printer and receive messages back from the printer when in interactive mode. NEC recommends the batch mode setting for normal use.Wait StateThere are four control-panel buttons on the front of the NEC LC-890 to change settings: ONLINE, MENU, NEXT, and SELECT. There is also an LCD menu display.To change the wait state (time-out) to infinite, do the following:
Additional query words: 3.10 win31 neclc890 lc890
Keywords : |
Last Reviewed: December 3, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |