Novell Printing Configurations Supported by Windows

ID: Q89105


The information in this article applies to:
  • Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11


SUMMARY

This article describes the printing configurations that Microsoft Windows supports when you print on a Novell NetWare network.

For testing purposes, Microsoft recommends that you use one of the supported configurations.


MORE INFORMATION

Printing to a Printer Connected to Your Computer

Printing to a printer connected by a standard LPT port to your local computer is a supported configuration

NOTE: This does NOT mean that one workstation can print to a printer connected to another workstation; this configuration is not supported. To print from one workstation to another under NetWare a value-added-process (VAP) is needed, such as RPRINTER, LANSpool, PS-Print, Hot Print, and Network Assistant Plus. For support for using these products, contact the manufacturer.

Printing to a Printer Connected to a Dedicated Server

Printing to a printer connected to a dedicated server is a supported configuration.

NOTE: This does NOT mean a server that is both a workstation and a server. If it is, then it is a non-dedicated server and the configuration is not supported.

Printing to a Printer Connected to a Dedicated Print Server

Printing to a printer connected to a dedicated print server is also supported.

If you are attempting to print in a different configuration, query on the following words in the Microsoft Knowledge Base:
tshoot and printsharing

Additional query words: 3.10 win31 3.0a 3.00a 3.0 3.00 peer-to-peer program brightworks novell 3.11

Keywords :
Version : WINDOWS:3.0,3.0a,3.1,3.11
Platform : WINDOWS
Issue type :


Last Reviewed: November 24, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.