The information in this article applies to:
SUMMARY
This article discusses three topics regarding running Sun's PC/NFS
network with Windows 3.0. PC/NFS is not a supported network.
MORE INFORMATIONVersion 3.5 Is RequiredYou should use version 3.5 or later of the PC/NFS network when attempting to run it with Windows 3.0.Printing on PC/NFS NetworkTo print properly from the Sun PC/NFS Network when using Windows, do the following:
printing and unsupported and UNIX Using File Manager on PC/NFS NetworkThe error "System Error Network Error on Drive <letter>:", where <letter> is the logical drive letter C to Z, may occur when opening Windows 3.0 File Manager running in conjunction with a Sun PC-NFS network. The following solution corrects this problem in most situations.SolutionMake sure that the network drives are mounted in logical order. For example, if you have a local drive C, then start your network drive mountings with logical drive D and continue from there alphabetically. In the CONFIG.SYS file, modify the line
as follows
where n is a number from 1 to 8, based on the number of drives you
have determined will be mounted. Do not include local hard drives in
this number. Because 8 is the maximum simultaneous drive mountings
supported by Sun, this number could be set to 8, and the amount of
error messages received will be this number minus the number of drives
actually mounted.
The Sun products included here are manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability. Additional query words: 3.00 3.0 3.0a 3.00a pc-nfs pcnfs
Keywords : |
Last Reviewed: October 4, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |