The information in this article applies to:
SYMPTOMSThe following error messages occur at the end of the WinLogin setup process if you install a WinLogin database from the WinLogin 1.0 master disks
-and- where X: is the floppy drive containing the master disk. MORE INFORMATIONAfter successfully completing the setup process, the WinLogin Setup program writes the location of the newly installed database to the STFSETUP.IN_ file on the master disk, so it can use this as the default database location during reinstalls. The above error messages occur because the WinLogin master disk is write-protected. The only side effect of this error is that the newly installed database location will not be the default database location if you reinstall WinLogin. This error has no effect on the installed copy of WinLogin. WORKAROUNDTo avoid this problem, install WinLogin from a backup copy of the master disk, and do not write-protect the backup copy until you finish running the WinLogin Setup program. An alternative is to copy all of the files from the master disk to a network drive, and write-protect all these files except STFSETUP.IN_. STATUSMicrosoft is researching this problem and will post new information here as it becomes available. Additional query words: 3.1 3.10 WinLogin win login
Keywords : |
Last Reviewed: October 7, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |