The information in this article applies to:
SUMMARYThe Windows 3.1 drivers for the Pro Audio Spectrum 16 audio card from Media Vision come packaged with the card on a disk labeled "Pro Audio 16 Windows Drivers." To install the drivers, run the INSTALL.EXE on the drivers disk. The INSTALL.EXE file is a Windows program and must be run from Windows. MORE INFORMATION
Installation of the Pro Audio Spectrum 16 Windows drivers causes the
following changes:
The settings for the DMA channel (3) and interrupt (7) are the factory
defaults. Valid settings for the DMA channel are 0, 1, 2, 3, 5, 6, and 7.
Valid settings for the interrupt are 2, 3, 5, 7, 10, 11, 12, and 15. The
Pro Audio Spectrum 16 includes a Sound Blaster compatibility mode which is
automatically set to DMA channel 1, interrupt 5, and I/O port address 220.
In most cases, DMA channel 1 can be shared with the Sound Blaster
compatibility mode, but it is not possible to share the same interrupt
setting.
Changes made to the WIN.INI file:
Files copied to the \WINDOWS directory:
MIX.EXEFiles copied to the \WINDOWS\SYSTEM directory: MCIMIXER.DRVThe WHATSUP.DOC file on the "Pro Audio 16 Windows Drivers" disk contains a description of most of the above files. The Pro Audio Spectrum 16 includes the following features:
The product included here, Pro Audio Spectrum 16, is manufactured by Media Vision, Inc., a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability. REFERENCES"Pro Audio Spectrum 16 User's Guide," pages 1-3 to 1-4 and 1-27 to 1-36 Additional query words: 3.10 audiospectrum mediavision multi-media mmtitles
Keywords : win31 |
Last Reviewed: September 24, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |