Errors Using Non-TAPI Programs If TAPI Program Set to Answer

• Microsoft Windows 95
• Microsoft Windows 98

SYMPTOMS

When you try to use a 16-bit non-TAPI-aware communications program in Windows 95/98, you may receive one of the following error messages:

• The port is already open.



• Could not initialize port.



• The selected COM port is either not supported or is being used by another device. Select another port.

Port already open

CAUSE

This problem can occur for the following reasons:

• If the Dial-Up Networking server is installed and set to Allow Caller Access, the COM port is effectively locked to non-TAPI- aware applications. This may not be obvious because the Dial-Up Networking server does not place an icon on the taskbar.



• If you set Microsoft Fax to answer incoming calls automatically, the COM port is effectively locked to non-TAPI-aware applications.



• There is a hardware (IRQ) conflict. To check for IRQ conflicts, use the right mouse button to click My Computer, then click Properties on the menu that appears. Click the Device Manager tab, then check the properties for each device.

RESOLUTION

To work around this problem, you must set the TAPI-aware application to not answer incoming calls. After you have used the non-TAPI-aware application, set the TAPI-aware application to answer incoming calls again.

The Dial-Up Networking server (available as an add-on) and Microsoft Fax are examples of TAPI-aware applications that you can set to answer incoming calls automatically. To set these applications to not answer incoming calls, follow the steps in the sections below.

Dial-Up Networking Server

1. Double-click My Computer, and then click Dial-Up Networking.



2. On the Connections menu, click Dial-Up Server.



3. Click the No Caller Access option button, then click OK.

Microsoft Fax

1. Double-click the Microsoft Fax Status icon on the taskbar.
   
   NOTE: If this icon is not present, first double-click the Inbox icon on the desktop, then click the Fax profile if prompted.



2. On the Options menu, click Modem Properties, then click Don't Answer in the Answer Mode section.

MORE INFORMATION

These error messages do not occur when you are using TAPI-aware programs such as HyperTerminal.

Additional query words: autoanswer telephony dialup

Keywords : kberrmsg kbtool win95
Version : windows:95,98
Platform : WINDOWS
Issue type : kbprb