Error Message: The Computer Is Not Receiving a Response...
ID: Q151165
|
The information in this article applies to:
-
Microsoft Windows 95
-
Microsoft Windows 98
SYMPTOMS
When you run Dial-Up Networking, you may receive the following error
message:
The computer is not receiving a response from the modem. Check
that the modem is plugged in, and if necessary, turn the modem
off, and then turn it back on.
When you run HyperTerminal or MSN, The Microsoft Network, you may be
disconnected immediately after you click Connect.
CAUSE
This behavior can occur if you have an invalid command in the Extra
Settings box in the Advanced Connection Settings dialog box, or if your
modem is trying to connect too quickly.
RESOLUTION
To resolve this issue, use the following steps:
- In Control Panel, double-click Modems.
- On the General tab, click your modem, and then click Properties.
- On the Connection tab, click Advanced
- Verify or remove the setting in the Extra Settings box.
- Click OK or Close until you return to Control Panel.
- Test to determine if the issue is resolved. If the issue is not
resolved, in Control Panel, double-click Modems.
- On the General tab, click your modem, and then click Properties.
- On the Connection tab, click Advanced.
- Add a "&F" setting to the Extra Settings box, and then Click OK or
Close until you return to the desktop.
Additional query words:
hypertrm
Keywords : kbenv kberrmsg kbhw kbtool win95 wincomm win98
Version : 95
Platform : WINDOWS
Issue type : kbprb
|