Cold Boot Hangs IBM Aptiva E-Series Computer After Upgrading

ID: Q190603

The information in this article applies to:
  • Microsoft Windows 98

SYMPTOMS

If you upgrade Microsoft Windows 95 to Windows 98 on an IBM Aptiva E84 or E56 computer, your computer may stop responding (hang) when you turn it off and then back on (known as a cold boot).


RESOLUTION

To resolve this issue, contact IBM Technical Support to inquire about the availability of a fix that addresses this issue.

To work around this issue, use either of the following methods:

Method 1

When you start your computer, press and hold down the CTRL key until the Windows 98 Startup menu appears, and then choose Safe Mode. Once Windows 98 is loaded, click Start, click Shut Down, click Restart, and then click OK.

Method 2

If your computer hangs, restart your computer and choose Normal on the Windows 98 Startup menu.

Method 3

Disable 32-bit disk access. To do so, follow these steps:
  1. Click Start, point to Programs, point to Accessories, point to System Tools, and then click System Information.


  2. On the Tools menu, click System Configuration Utility.


  3. On the General tab, click Advanced.


  4. Click the Force Compatibility Mode Disk Access check box to select it.


  5. Click OK, click OK, and then click Yes when you are prompted to restart your computer.


Additional query words: hangs freeze freezes frozen lock locks up

Keywords : kbhw win98
Version : WINDOWS:98
Platform : WINDOWS
Issue type : kbprb


Last Reviewed: February 12, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.