Adaptec ANA-6911A/TX Network Adapter Detected as DEC DC21143

ID: Q191033

The information in this article applies to:
  • Microsoft Windows 98

SYMPTOMS

If you have an Adaptec ANA-6911A/TX network adapter, the Windows 98 hardware detection process may incorrectly identify it as a PCI Fast Ethernet DEC 21143-based adapter.


CAUSE

This behavior can occur if the network adapter responds during the hardware detection process with an identification code that matches the PCI Fast Ethernet DEC 21143-based adapter.


RESOLUTION

To resolve this issue, remove the PCI Fast Ethernet DEC 21143-based adapter, and then use the Adaptec installation software included with the network adapter to install the correct network adapter drivers.

To remove the PCI Fast Ethernet DEC 21143-based adapter, follow these steps:

  1. Click Start, point to Settings, and then click Control Panel.


  2. Double-click Network.


  3. On the Configuration tab, click PCI Fast Ethernet DEC 21143 Based Adapter, and then click Remove.


  4. Click OK.


For information on how to install Adaptec network drivers, consult the network adapter's documentation or manufacturer.

Additional query words: wrong nic

Keywords : kbhw kbnetwork win98
Version : WINDOWS:
Platform : WINDOWS
Issue type : kbprb


Last Reviewed: February 13, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.