The information in this article applies to:
SYMPTOMSWhen installing Windows NT on an IBM PS/ValuePoint P60/D Pentium machine, the computer may hang with a STOP message. CAUSEThis problem occurs just prior to the GUI-portion of the Windows NT 3.1 Setup procedure, and may be due to a conflict with the Maxtor MXT-540 AT drive firmware. WORKAROUND
To correct this problem, obtain a firmware upgrade from IBM's BBS at
(919) 517-0001. The files to download are P60NT.DSK (from Directory area
36) and LDF.COM (from Directory area 10). After downloading the two files
to your hard-drive do the following from the MS-DOS command prompt:
MORE INFORMATION
The IBM firmware utility upgrades a Maxtor MXT-540 AT drive to firmware
level 6.0 for the IBM PS/ValuePoint P60/D Pentium machine. The utility
works on only the first upgradable MXT-540 AT drive it finds, so if you
have more than one MXT-540 AT drive, apply the upgrade to each drive, and
power-cycle the system after each run. For more information on the upgrade
utility, contact IBM Hardware Technical Support at (800) 772-2227.
Additional query words: prodnt ide blue trap
Keywords : kbsetup ntstop ntsetup |
Last Reviewed: February 3, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |