Event IDs 4307 and 4311 Occur After Disabling WINS Bindings

ID: Q123981

The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5

SYMPTOMS

After you attempt to disable the WINS bindings for a network interface card (NIC) in the Control Panel Network dialog box, Event Viewer reports two errors:

Event ID 4307: Initialization failed because the transport refused to open initial Addresses.

Event ID 4311: Initialization failed because the driver device could not be created.


CAUSE

These errors occur when you disable all WINS related bindings and Show Binding For is set to < All Components >. They may also occur due to an incorrect order of the bindings.


RESOLUTION

To correct this problem:

  1. In the Show Bindings For list box, choose WINS Client(TCP/IP).


  2. Select the WINS binding shown and choose Enable.


  3. Verify that the WINS bindings are above any RAS bindings in the list (lower all RAS bindings to the bottom of the list).


  4. Choose OK and then choose OK again.


If enabling the bindings does not correct the problem, remove the TCP/IP protocol completely, and then reinstall it.

Additional query words: adapter prodnt

Keywords : kbnetwork ntnetserv ntconfig
Version : 3.5
Platform : winnt
Issue type :


Last Reviewed: February 16, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.