Automating Client Services for NetWare (CSNW) Installation

ID: Q133339

The information in this article applies to:

Microsoft Windows NT Workstation versions 3.5, 3.51
Microsoft Windows NT Server versions 3.5, 3.51
Microsoft Resource Kit for Windows NT version 3.5

SUMMARY

When you run Unattended or Computer Profile Setup (CPS), by default, Client Services for NetWare (CSNW) is not installed. However, you can accomplish automated installation of CSNW by modifying setup files.

MORE INFORMATION

To automatically configure CSNW when you use an answer file with Windows NT Setup, modify the TXTSETUP.SIF, NTLANMAN.INF, AUTOEXEC.NT, and SYSTEM:

WARNING: Modification of INF files may cause serious, system-wide problems before and after Setup and may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the modification of INF files can be solved. Make INF modifications at your own risk. Corporate Network Systems does not support the modification of INF files. For more information on INF files, refer to the Programmer's Guide included in the Windows NT DDK or contact Microsoft Consulting Services or a Solution Provider.

Copy the \I386 directory from the Windows NT compact disc to your hard drive.

Expand NTLANMAN.IN_, AUTOEXEC.NT_, and SYSTEM._ using the EXPAND.EXE command.

The EXPAND.EXE file is located in the %SystemRoot%\SYSTEM32 directory.

Make a backup copy of TXTSETUP.SIF and rename NTLANMAN.IN_, AUTOEXEC.NT_, and SYSTEM._.

Add the following to the [Files] section of the TXTSETUP.SIF file:
```
      ;;; Added line below. <your_name>, <today's_date>
      nwcfg.dll = dx,,,2,0,0
 
```
NOTE: The text ";;; Added line below. <your_name>, <today's_date>" is an optional comment that Microsoft recommends you add for tracking and easier troubleshooting in the future.

Add the following to the [ServiceData] section of the NTLANMAN.INF file:
```
      ;;; Added line below. <your_name>, <today's_date>
      ServiceData_5      = "OEMNSVNW.INF","NWWKSTA",11,NWWKSTA
 
```
NOTE: The ServiceData_5 line must immediately follow the ServiceData_4 line.

Add the following to end of the AUTOEXEC.NT file:

 
      REM Install netware redirector
      lh %SystemRoot%\system32\nw16
      lh %SystemRoot%\system32\vwipxspx

Run Registry Editor (REGEDT32.EXE) on another Windows NT system running CSNW.

From the HKEY_LOCAL_MACHINE subtree, go to the following key:


      \SYSTEM\CurrentControlSet\Control\Print\Providers

Choose the Save Key option from the Registry menu to save the Providers Key to a file (for example: A:\PROVIDE.TMP).

Choose the OK button.

Make sure the HKEY_LOCAL_MACHINE window is highlighted by selecting it.

Choose the LOAD HIVE option from the Registry menu.

In the Load Hive dialog box, specify SYSTEM file that was expanded in Step 2 and choose the OK button:

When prompted for Key Name, specify Template System and choose the OK button.

Go to the key:


   \Template System\CurrentControlSet001\Control\Print\Providers

Choose the Restore option from the Registry menu and specify the file saved in Step 9 above (for example: A:\PROVIDE.TMP).

Choose the OK button.

Select the Template System key.

Choose the Unload Hive option from the Registry menu.

Run Unattended Setup.

For details on running Unattended Setup refer to the "Unattended Installation" section in Chapter 3 or the Windows NT Resource Kit.

To automatically configure CSNW using computer profile setup (CPS):

Upload the master system (must have CSNW installed) to the distribution server.

Modify the [ServiceData] section of %SYSTEMROOT%\SYSTEM32\DEFAULTS.INF on the distribution server to appear as follows.

NOTE: DEFAULTS.INF lines in the following example that do not fit on one line in this article but should be on one line in the DEFAULTS.INF file, have several parts to it and are labeled as such to help you identify and modify the correct lines. Be sure to remove the line labels if you copy this example to the DEFAULTS.INF file:


              line 1: [ServiceData]
      line 2, part 1: !ServiceInfList =
      line 2, part 2: {"OEMNSVSV.INF","OEMNSVWK.INF","OEMNSVNB.INF",
      line 2, part 3: "OEMNSVRP.INF", "OEMNSVNW.INF"}
      line 3, part 1: !ServiceOptionList = {"SRV","WKSTA","NETBIOS",
      line 3, part 2: "RPCLOCATE","NWWKSTA"}
              line 4: !ServiceBbList = {"3","2","5","11","11"}
      line 5, part 1: !ServiceNameList = {"LanmanServer",
      line 5, part 2: "LanmanWorkstation","NetBIOS","RPCLOCATOR","NWWKSTA"}

Run WINNTP.EXE on the target system.

For details on uploading the master system to the distribution server or running WINNTP.EXE from the target system read "Preinstalling Windows NT Using CPS" in Volume 1 of the Windows NT Resource Kit.

Additional query words: prodnt upgrade

Keywords : ntsetup nthowto ntreskit
Version : 3.50 3.51
Platform : WINDOWS
Issue type :