STOP 0x0000005c on Multi-Processor Computer During Setup

ID: Q136781

The information in this article applies to:

Microsoft Windows NT Workstation version 3.51
Microsoft Windows NT Server version 3.51

SYMPTOMS

During the installation of Windows NT 3.51 on a multi-processor computer with a single processor, the following STOP Message appears:

STOP: 0x0000005c
HAL NO RTC DEVICE INTERRUPT

CAUSE

This problem occurs when the Windows NT version Setup program calls the computer BIOS to obtain computer configuration information. On several computers, the BIOS returns invalid information for the number of processors installed on the computer. Therefore the multi-processor Hardware Abstraction Layer (HAL) is installed instead of required uni- processor HAL.

RESOLUTION

To correct this problem, do one of the following:

Contact your computer manufacturer and request an updated BIOS

-or-

Press F5 during the portion of Windows NT 3.51 Setup that displays the following text:

Setup is inspecting your computer hardware

This forces Windows NT Setup to use the uni-processor Hardware Abstraction Layer (HAL).

NOTE: Selecting "Standard PC" (without quotes) for the computer type in

Custom Setup does not correct the problem.

Additional query words: prodnt trap 0x5c

Keywords :
Version :
Platform :
Issue type :