Error Running Windows NT After Restoring From Backup
ID: Q137004
|
The information in this article applies to:
-
Microsoft Windows NT Workstation versions 3.5, 3.51
-
Microsoft Windows NT Server versions 3.5, 3.51
SYMPTOM
After you restore Windows NT from a tape backup, the following error
message appears:
<File Name> Entry point not found. The procedure (<function>)
could not be located in the DLL <DLL File Name>.
<File Name> Application did not initialize properly. (0xC0000039)
In the Event Viewer, the following description for a system event appears:
Not enough server storage available to process this request.
NOTE: The Event ID varies for the description.
CAUSE
This problem occurs when some Windows NT system files were not replaced
because they were open or locked during the tape restore operation.
RESOLUTION
To correct this problem, ensure that you have plenty of hard disk space
(over 90 MB) and perform the following:
- Install a temporary installation of Windows NT to a separate directory.
This ensures that none of the original Windows NT system files are
locked or open.
- Restore all backed up files from the tape to the original Windows NT
directory.
- Shutdown the temporary installation of Windows NT and restart the
original installation of Windows NT.
- Either remove the temporary installation of Windows NT or change the
default operating system in Control Panel System to the original
installation of Windows NT.
Keywords :
Version : 3.50 3.51
Platform : WINDOWS
Issue type :