Unable to Read Error 52225 During Windows NT Setup

ID: Q137064


The information in this article applies to:
  • Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0
  • Microsoft Windows NT Server versions 3.5, 3.51, 4.0


SYMPTOMS

When you install Windows NT Server or Workstation, the following error appears during the text mode portion of Setup:

UNABLE TO READ
Error 52225 line 1933
D:\winnt\private\ntos\boot\setup\setup.c

-or-

ERROR
Unexpected error [769] occured at
Line 1933 in d:\nt\private\ntos\boot\setup.c
Press any key to continue

-or -

The error during Windows NT V4.0 setup is as follows:

Unexpected error (256) occurred at
Line 2180 in d:\nt\private\ntos\boot\setup\setup.c


Setup cannot configure your computer to start windows NT. This may indicate a problem with the hard disk containing your C: drive or C: may be severely corrupt. Setup cannot continue.

Press F3 to exit.


CAUSE

The error occurs because Setup cannot write the disk signature. Some computers have a BIOS option to enable protection of the master boot record (MBR) and/or boot sector. If this option is turned on, Setup is not able to write the disk signature or create/delete partitions during Setup.


RESOLUTION

Disable the CMOS option to protect the MBR and boot sector.

Additional query words: prodnt

Keywords : kbsetup ntsetup
Version : 3.5 3.51 4.0
Platform : winnt
Issue type :


Last Reviewed: January 20, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.