Missing and Multiple Drive Letters Assigned To Partitions

• Microsoft Windows NT Workstation version 3.51
• Microsoft Windows NT Server version 3.51

SYMPTOMS

When you install Windows NT 3.51 on a hard disk partition greater than 9, the following problems may occur:

• The first primary partition is not assigned a drive letter.



• The Windows NT operating system partition is assigned 2 drive letters. (Drive C: and the letter that would be normally be assigned to partition L:)



• From File Manager and from the MS-DOS prompt, both drive letters C: and L: address the same Windows NT operating system partition.



• If you assign a drive letter to the first primary partition using Disk Administrator, you can then use the first primary partition in File Manager.



• When you reboot the system, you lose the drive letter assigned to the first primary partition and must re-assign it again.

                    [logical drives in extended partition]

   Primary1      L2  L3  L4  L5  L6  L7  L8  L9  L10  <-- operating system
   (unassigned)  D:  E:  F:  G:  H:  I:  J:  K:  C: 

RESOLUTION

• Move or re-install Windows NT into a partition numbered less than ten.
  
  -or-



• Delete partitions until the operating system partition is partition number nine or less. Change the arc path in the BOOT.INI file to reflect the new partition number before you reboot. The arc path looks like this:
  

  Multi(0)Disk(0)Rdisk(0)partition(9)\winnt35

STATUS

Microsoft has confirmed this to be a problem in Windows NT version 3.51 We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

Additional query words: prodnt

Keywords : kbsetup ntsetup kbbug3.51
Version : 3.51
Platform : winnt
Issue type :