SNMP Trap Frames Appear to be Dropped

• Microsoft Windows NT Server version 3.51

SYMPTOMS

SNMP Trap Frames appear to be dropped when they are sent with an extremely small delay between frames (1ms or less) to an SNMP Monitor application, such as SNMPUTIL.EXE, running locally, or on a remote station.

CAUSE

The Trap Frames appear to be dropped because they are never received by the SNMP Monitor application, even though they may have arrived at the station successfully. The SNMP Monitor application fails to receive all the Trap Frames because of the following two problems:

• The size of the pipe created by SNMPTRAP.EXE that collects Trap PDUs (Protocol Data Unit) from Trap Frames collected on UDP port 162 is equal to the maximum size of only one Trap PDU.



• MGMTAPI.DLL (loaded by SNMP Monitoring applications such as SNMPUTIL.EXE) does not change the state of the pipe created by SNMPTRAP.EXE to message mode. When the messages start queuing up on the server side of the pipe (SNMPTRAP.EXE), the client side of the pipe (SNMP Monitor) assumes that each read consists of only one Trap PDU. Because the mode of the pipe created by SNMPTRAP.EXE was never set manually by MGMTAPI.DLL, it would default to byte mode and the SNMP Monitor application would end up reading multiple Trap PDUs but only decoding the first one in the buffer, effectively dropping the rest.

RESOLUTION

This problem has been corrected in the latest Service Pack for Windows NT 3.51.

STATUS

Microsoft has confirmed this to be a problem in Windows NT version 3.51. This problem was corrected in the latest Windows NT 3.51 U.S. Service Pack. For information on obtaining the Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces):

S E R V P A C K

Additional query words: prodnt

Keywords : kbprint ntnetserv kbbug3.51 kbfix3.51.sp4 NTSrv
Version : 3.51
Platform : winnt
Issue type :