Daylight Savings Time Not Advancing

ID: Q140639


The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.51
  • Microsoft Windows NT Server version 3.51


SYMPTOMS

On a small percentage of computers running Windows NT, a clock or application running on the desktop does not reflect the Daylight Savings time change even though the user has set Date/Time to "Automatically Adjust for Daylight Saving Time" in the Control Panel. Instead, the time displayed on applications such as the Accessories Clock show a continuation of Daylight Saving Time while the Control Panel's Date/Time displays the new Standard Time.


CAUSE

Each hour, Windows NT runs code that examines the system time versus the time stored in the CMOS clock. In some computers, Windows NT's system time (which is computed by interrupts) can drift. If more than one minute of drift is detected and if this drift is detected and corrected during the one hour between 1am and 2am on Daylight Savings Time/Standard Time switch over dates, time will not switch properly.


WORKAROUND

To work around this problem, open Control Panel, click the Date/Time icon, and click OK. Do not click the Cancel button because the system time will not change but the application times will jump ahead by one hour on some computers.


RESOLUTION

This problem has been corrected in the latest Service Pack for Windows NT version 3.51.


STATUS

Microsoft has confirmed this to be a problem in Windows NT version 3.51. This problem was corrected in the latest Windows NT 3.51 U.S. Service Pack. For information on obtaining the Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces):

S E R V P A C K

Additional query words: prodnt

Keywords : ntgeneral
Version : 3.51
Platform : NT WINDOWS
Issue type :


Last Reviewed: January 31, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.