Unattended Installation of IBM Auto 16/4 Token Ring Adapter

• Microsoft Windows NT Workstation versions 3.5, 3.51
• Microsoft Windows NT Server versions 3.5, 3.51

SUMMARY

This article describes how you can perform an unattended installation of the IBM Auto 16/4 token ring adapter in Windows NT.

MORE INFORMATION

NOTE: Before you start the unattended installation of the token ring adapter, please see the following article in the Microsoft Knowledge Base regarding the OEMSETUP.INF file for IBMTOK4.SYS:

ARTICLE-ID: Q137505
TITLE : IBM 16/4 Auto Token Ring Adapter Driver Causes Event ID 7000

1. Create a directory on your hard disk drive. For example: c:\ibmtok4



2. Copy all the files in the I386 directory of the Windows NT 3.51 compact disc to c:\ibmtok4:



3. Copy IBMTOK4.SYS from the \drvlib\netcard\x86\ibmtok4 directory on the Windows NT compact disc to c:\ibmtok4.



4. Expand the following files in c:\ibmtok4 by typing the following:
   
   expand oemnadtk.in_ oemnadtk.inf
   
   expand ntlanman.in_ ntlanman.inf



5. Make a copy of DOSNET.INF by typing the following in c:\ibmtok4:
   
   copy dosnet.inf dosnet.bak



6. Rename the *.IN_ files in c:\ibmtok4 to *.BAK by typing the following:
   
   ren oemnadtk.in_ oemnadtk.bak
   
   ren ntlanman.in_ ntlanman.bak



7. Change a few lines in OEMNADTK.INF to read as follows:
   
   ProductSoftwareName = "IbmTok4"
   ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ibmtok4.sys"
   ProductHardwareName = "IbmTok4"
   
   [Files-IBMTok]
   19,IBMTOK4.SYS , SIZE=25600
   
   [OptionsTextENG]
   IBMTOK = "IBM Auto 16/4 Token-Ring Adapter"
   FunctionTitle = "IBM Auto 16/4 Token-Ring Adapter Card Setup"
   ProductSoftwareDescription = "IBM Auto 16/4 Token-Ring Adapter Driver"
   ProductHardwareDescription = "IBM Auto 16/4 Token-Ring Adapter"
   ProductSoftwareTitle = "IBM Auto 16/4 Token-Ring Adapter Driver"
   ProductHardwareTitle = "IBM Auto 16/4 Token-Ring Adapter"



8. In DOSNET.INF, change:
   
   d1,ibmtok.sys
   
   to
   
   d1,ibmtok4.sys



9. Change a line in NTLANMAN.INF to read as follows:
   
   set AdapterSrcDir = $(!OEMNetDrive) - use to read $(OEMNetDrive)



10. Create an answer file (for example: IBMTOK.TXT) in c:\ibmtok4. You may create the answer file using the Setup Manager included in the Windows NT Resource Kit version 3.51. The following is a recommended content of IBMTOK.TXT:
    
    [Unattended]
    Method = express
    ConfirmHardware = no
    NtUpgrade = no
    Win31Upgrade = no
    TargetPath = \WINNT35
    
    [GuiUnattended]
    !DetachedProgram = ""
    !Arguments = ""
    !SetupNetwork = "YES"
    !SetupApplications = "NO"
    !TimeZone = "(GMT-06:00) Central Time (US & Canada)"
    
    [UserData]
    !FullName = "Name"
    !OrgName = "Company"
    !ComputerName = "IBMTOK4"
    !ProductId = "xxxxxxxx-xxx"
    
    ;The NetworkAdapterData and AdapterParameters section for the ;configuration of the IBM Auto 16/4 Token Ring Adaper.
    
    [NetworkAdapterData]
    !AutoNetOption = "IBMTOK"
    
    [AdapterParameters]
    IoBaseAddress = 1
    MediaType = 2
    NetworkAddress = ""
    
    [TransportData]
    !InstallNWLink = 1
    !AUTONETIPXFRAMETYPE = 255
    !InstallTCPIP = 0
    !InstallNetBEUI = 1
    
    [DomainData]
    !AutoWorkGroup = "WORKGROUP"



11. To start the unattended installation of the IBM Auto 16/4 token ring adapter, type the following at the command prompt (make sure you are in c:\ibmtok4):
    
    winnt /s:x:\ /t:c: /u:x:\ibmtok.txt /b

Additional query words: prodnt

Keywords : ntsetup ntdriver
Version : 3.50 3.51
Platform : WINDOWS
Issue type :