Using Iomega Parallel Port Zip Drives with Windows NT

ID: Q152123

The information in this article applies to:

Microsoft Windows NT Workstation versions 3.5, 3.51
Microsoft Windows NT Server versions 3.5, 3.51

The Iomega Parallel Port Zip Drive is not listed in the Windows NT Hardware Compatibility List (HCL). Iomega Corporation does supply a Windows NT 3.51 device driver for the drive.

The Parallel Port driver for 3.51 is available on the Iomega Web Site at:

http://www.iomega.com/support/software/ftp.html

Windows NT 4.0 only supports the SCSI version of this drive. The parallel version is not natively supported.

For additional information on the Iomega ZIP drives and Windows NT, refer to the Iomega FaxBack service at (800) 456-5522 or (801) 778-5763, or contact Iomega Technical Support at (801) 629-7610.

The Iomega ZIP drives and cartridges are manufactured by Iomega Corp., a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Microsoft in no way guarantees the accuracy of this third-party contact information.

Keywords : kb3rdparty kbhw nthw NTSrvWkst
Version : WinNT:3.5,3.51
Platform : winnt
Issue type :