Installing Windows NT 4.0 Printer Drivers on a 3.51 Server
ID: Q154612
|
The information in this article applies to:
-
Microsoft Windows NT Server versions 3.51, 4.0
-
Microsoft Windows NT Workstation version 4.0
-
Microsoft Windows 95
SUMMARY
To allow Windows NT 4.0 clients to connect to printers on a Windows NT
3.51 server and have the driver reside on the server, it is necessary to
install the 4.0 drivers on the 3.51 server.
NOTE: Windows 95 point and print drivers cannot be installed on a Windows
NT 3.51 server. Attempts to do so results in the following error message:
Alternate drivers cannot be installed
MORE INFORMATION
If the printer already exists on the Windows NT 3.51 Server, use the
following steps to add a 4.0 driver for use by Windows NT 4.0 clients:
- Log on to the Windows NT 4.0 workstation using an account that has
administrator privileges on the server you will be installing the
drivers on.
- From the Start menu, choose Run.
- In the Open box, type \\<servername>, where <servername> is the name
of the 3.51 server.
- Open the Printers Folder on the server.
- Select the printer you wish to add a 4.0 driver for.
- Select File/Properties, install the driver when prompted, then choose
the Sharing tab.
- Select the alternate drivers you wish to install, then select OK.
If you are creating a new printer on a Windows NT 3.51 Server, use the
following steps to install a Windows NT 4.0 driver on a 3.51 Server for
use by 4.0 clients:
- Log on to the Windows NT 4.0 workstation using an account that has
administrator privileges on the server you will be installing the
drivers on.
- From the Start menu, choose Run.
- In the Open box, type \\<servername> where <servername> is the name of
the Windows NT 3.51 Server.
- Open the Printers Folder on the server.
- Select Add Printer.
- Select Remote print server \\<servername>, then select Next.
- Choose the port the printer will use, then select Next
NOTE: If the port does not already exist on the server, you will need
to go to the server to create the port. This cannot be done remotely.
- Choose the printer make and model, then select Next.
- Type a printer name, then Select Next.
- Choose Shared, enter a Share name, then select all operating systems
that will be connecting to the Windows NT 3.51 Server.
- You will be prompted for the source media for Windows NT 3.51 and
any other operating systems selected in step 10.
Additional query words:
prodnt mips alpha win95
Keywords : kbnetwork ntprint NTSrvWkst
Version : WinNT:3.51 4.0
Platform : winnt
Issue type :
|