Setup Stops When Inspecting Computer Hardware Configuration
ID: Q156530
|
The information in this article applies to:
-
Microsoft Windows NT Workstation version 4.0
-
Microsoft Windows NT Server version 4.0
SYMPTOMS
When you run Windows NT 4.0 Setup from the three Setup floppy disks, or
when you run Setup using the WINNT /B command, your computer may stop
responding while the following message is displayed:
Setup is inspecting your computer's hardware configuration.
CAUSE
The Windows NT 4.0 installation compact disc meets the El Torito
specification using Non-Emulation mode regarding bootable CD-ROM media.
Some newer computers support the El Torito specification but adhere to
Emulation-mode specifications.
Some system BIOSes that support the El Torito specification in Emulation
mode interfere with Windows NT Setup and cause the computer to hang during
the hardware detection process. It seems that the BIOS grabs the CD-ROM
device during the Power On System Test (POST) and causes Windows NT
hardware detection to hang. This can also happen if you leave CD-ROM drive
in the boot sequence (drive C, CD-ROM drive, drive A).
RESOLUTION
The system BIOS may display that it recognizes a bootable CD-ROM during
POST. There are usually CMOS options that allow you to select which boot
devices to try and in what order. We recommend disabling the option to
boot from the CD-ROM drive in the CMOS settings.
We also recommend that you not leave the Windows NT CD-ROM in the CD-ROM
drive until after the computer configuration detection is finished. Or,
contact the manufacturer of your computer or system BIOS for an updated
BIOS to correct the problem.
Note that this is only one cause of the problem. Other causes include IRQ
conflicts, an incorrect HAL, external caching, and shadowing options in
the CMOS settings.
For additional information, see the following article in the Microsoft
Knowledge Base:
ARTICLE-ID: Q103659
TITLE : Setup Hangs While Inspecting Hardware; How to Use Ntdetect.com
Additional query words:
4.00 hang hangs lock up DEC
Keywords : kbsetup ntsetup nthw
Version : 4.0
Platform : winnt
Issue type :