STOP 0x0000001A on a Vectra VL Series System

ID: Q157820

The information in this article applies to:

Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0
Microsoft Windows NT Server versions 3.5, 3.51, 4.0

SUMMARY

During the normal operation of a Windows NT 3.51 system on a Hewlett Packard Vectra VL Series 3 or Vectra VL Series 4 computer with 16 MB of RAM installed in 4 MB SIMMS, the system fails with random STOP codes. The most predominate STOP code is STOP 0x0000001A.

The following STOP error message appears on your Windows NT server:

STOP: 0x0000001A (00041284, 0e7f8000, 00000CDB, C0502000)

NOTE: the first parameter in this case will always be 000041284. The other parameters will vary depending on the system configuration.

MORE INFORMATION

The system board on the Vectra VL Series has a problem it runs Windows NT with 16 MB of RAM using sets of 4-4 MB SIMMS. Hewlett Packard is currently working on the problem.

WORKAROUND

Hewlett Packard has found that adding 8 MB more of RAM to the system (for a total of at least 24 MB of RAM) resolves the issue. Contact Hewlett Packard for more information on this problem.

MORE INFORMATION

The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

Additional query words: prodnt memory 0x1A HP

Keywords : kb3rdparty ntstop NTSrvWkst
Version : 3.5 3.51 4.0
Platform : winnt
Issue type :