Error When Xcopying from Lan Manager Server

ID: Q160267


The information in this article applies to:
  • Microsoft Windows NT Workstation version 4.0
  • Microsoft Windows NT Server version 4.0
  • Microsoft LAN Manager Server version 2.2


SYMPTOMS

If a Lanman Manager 2.1 Client, Lan Manager 2.2 Server, or IBM OS/2 Warp system attempts to xcopy a file on a Windows NT 4.0 system to itself or location on the same or another Windows NT 4.0 system, the operation will fail as follows:

SYS1192: XCOPY cannot access the source or target drive.


CAUSE

The server is incorrectly responding to the Server Message Block (SMB) C transact2 Query path info, File = <filename>

A network trace will show the following SMB response from the server:


   R transact2 - Server Error, (1) Non-specific error code 

The expected response is:

   SMB: R transact2 Open (response) 


STATUS

Microsoft has confirmed this to be a problem in Microsoft Windows NT version 4.0. This problem was corrected in the latest Microsoft Windows NT 4.0 U.S. Service Pack. For information on obtaining the service pack, query on the following word in the Microsoft Knowledge Base (without the spaces):

S E R V P A C K

Additional query words: prodlm lanman

Keywords : kberrmsg kbnetwork ntdomain NTSrvWkst
Version : WinNT:4.0 2.2
Platform : winnt
Issue type : kbbug


Last Reviewed: January 30, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.