Sony Spressa SCSI CD-ROM Drive May Not Be Detected

ID: Q164434


The information in this article applies to:
  • Microsoft Windows NT Server version 4.0
  • Microsoft Windows NT Workstation version 4.0


SYMPTOMS

Windows NT Setup may not detect the Sony Spressa CDU-920S SCSI CD-ROM drive.


CAUSE

The Sony Spressa CDU-920S is shipped with the Parity, ID1, ID2, and Prevent/Allow settings preset to On. Note that the Parity jumper is also known as the Device Type jumper.


RESOLUTION

Remove the Parity/Device Type jumper. Note also that the firmware version must be 2.0B.

For information about removing jumpers or determining the firmware version, contact Sony Corporation.

Additional query words: spresa

Keywords : kbhw kbsetup ntboot ntdriver nthw
Version : 4.0
Platform : winnt
Issue type :


Last Reviewed: February 9, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.