Configuring a Novell DOS/Win Client-32 for DHCP

ID: Q166443


The information in this article applies to:
  • Microsoft Windows NT Server versions 3.5, 3.51, 4.0
  • Microsoft Windows for Workgroups version 3.11


SYMPTOMS

After you convert a Novell NetWare Client-32 for DOS/Windows to use DHCP, you receive the following error message on startup:

Warning: Interface is not configured.
Error binding TCP/IP protocols to 3C5X9.
Could not bind IP/ARP protocol stack to the board.
NOTE: The example above is for a 3Com 3c5x9 network adapter; the error message you receive may be slightly different.


CAUSE

As a static client, the Net.cfg file contained the following section:


PROTOCOL TCPIP
   BIND 3C5X9 1 ETHERNET_II interface_1
   IP_ADDRESS 130.57.4.126 interface_1
   IP_NETMASK 255.255.252.0 interface_1
   IP_ROUTER 130.57.4.254 interface_1 

If you follow Novell's guidelines, your Net.cfg file will look like this:

PROTOCOL TCPIP
   BIND 3C5X9 1 ETHERNET_II interface_1
   IF_CONFIGURATION DHCP 


RESOLUTION

To work around this problem, remove the BIND statement from the Net.cfg file, so it contains the below statements:


   PROTOCOL TCPIP
      IF_CONFIGURATION DHCP 

NOTE: The Startnet.bat file must contain the frame type ETHERNET_II


MORE INFORMATION

You must use the following file to use the following options:


   Tcpip.nlm   215222   1-27-97     10:10:34 PM 

The updated file is part of Tcp32d.exe, dated 29 MAR 97, and can be downloaded from Novell's ftp site.
  • To add a Hostname to the DHCP client, the Net.cfg file should have the following:
    
          PROTOCOL TCPIP
             HOSTNAME <host_name> 


  • To prevent the client from caching IP addresses, add the following entry to the Net.cfg file. This causes duplicate addresses on the network, if unable to contact DHCP server on startup.
    
          PROTOCOL TCPIP
             DHCPCACHEIP=NO 

    Therefore, the protocol TCP/IP section of the Net.cfg file would look like this:
    
          PROTOCOL TCPIP
             PATH TCP CFG C:\NOVELL\CLIENT32\TCP
             IF_CONFIGURATION DHCP
             HOSTNAME <host_name>
             DHCPCACHEIP=NO 


The products discussed here are manufactured by Novell, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this products' performance or reliability.

Additional query words: client32 binding client-32 novel dhcp

Keywords : kb3rdparty NTInterop nttcp NTSrv
Version : WFW:3.11;WinNT:3.51,4.0
Platform : winnt
Issue type : kbprb


Last Reviewed: February 12, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.